Citation: | Chen Y, Gu Y Q. Review on origami kinematics. Advances in Mechanics, 2023, 53(1): 154-197 doi: 10.6052/1000-0992-22-040 |
陈焱. 2020. 基于机构运动的大变形超材料. 机械工程学报, 56: 2-13 (Chen Y. 2020. Review on kinematic metamaterials. Journal of Mechanical Engineering, 56(19): 2-13 (in Chinese)).
|
杨富富. 2017. 基于桁架方法的空间过约束机构分析与可变多面体设计.[博士论文]. 天津: 天津大学 (Yang F F. 2017. Truss method for kinematic analysis of 3D overconstrained linkages and design of transformable polyhedrons. [PhD Thesis]. Tianjin: Tianjin University).
|
张霄. 2018. 空间机构网格与刚性折纸的关联研究.[博士论文]. 天津: 天津大学 (Zhang X. 2018. Study on the relationship between mobile assemblies of spatial linkages and rigid origami. [PhD Thesis]. Tianjin: Tianjin University).
|
Altmann S. 1986. Rotations, Quaternions, and Double Groups. Oxford University Press.
|
Ball R S. 1876. The Theory of Screws: A Study in the Dynamics of a Rigid Body. Dublin, Hodges, Forster and Co.
|
Beech R. 2009. The Practical Illustrated Encyclopedia of Origami: the Complete Guide to the Art of Paperfolding. Anness.
|
Beggs J S. 1966. Advanced Mechanism. Macmillan.
|
Belcastro S, Hull T C. 2002. Modelling the folding of paper into three dimensions using affine transformations. Linear Algebra its Applications, 348: 273-282. doi: 10.1016/S0024-3795(01)00608-5
|
Bennett G T. 1903. A new mechanism. Engineering, 76: 777.
|
Bricard R. 1927. Leçons de cinématique Tome II Cinématique Appliquée. Paris: Gauthier-Villars.
|
Cai J. 2016. Kinematic analysis of foldable plate structures with rolling joints. Journal of Mechanisms and Robotics, 8: 034502. doi: 10.1115/1.4032269
|
Cai J, Deng X, Xu Y, Feng J. 2016. Motion analysis of a foldable barrel vault based on regular and irregular Yoshimura origami. Journal of Mechanisms and Robotics, 8: 021017. doi: 10.1115/1.4031658
|
Cai J, Deng X, Zhou Y, Feng J, Tu Y. 2015. Bistable behavior of the cylindrical origami structure with Kresling pattern. Journal of Mechanical Design, 137: 061406. doi: 10.1115/1.4030158
|
Cai J, Liu Y, Ma R, Feng J, Zhou Y. 2017. Nonrigidly foldability analysis of Kresling cylindrical origami. Journal of Mechanisms and Robotics, 9: 041018. doi: 10.1115/1.4036738
|
Cai J, Zhang Q, Feng J, Xu Y. 2019. Modeling and kinematic path selection of retractable kirigami roof structures. Computer-Aided Civil Infrastructure Engineering, 34: 352-363. doi: 10.1111/mice.12418
|
Chen X, Feng H, Ma J, Chen Y. 2019a. A plane linkage and its tessellation for deployable structure. Mechanism and Machine Theory, 142: 103605. doi: 10.1016/j.mechmachtheory.2019.103605
|
Chen Y, Chai W H. 2011. Bifurcation of a special line and plane symmetric Bricard linkage. Mechanism and Machine Theory, 46: 515-533. doi: 10.1016/j.mechmachtheory.2010.11.015
|
Chen Y, Fan L, Bai Y, Feng J, Sareh P. 2020. Assigning mountain-valley fold lines of flat-foldable origami patterns based on graph theory and mixed-integer linear programming. Computers and Structures, 239: 106328. doi: 10.1016/j.compstruc.2020.106328
|
Chen Y, Feng H, Ma J, Peng R, You Z. 2016. Symmetric waterbomb origami. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 472: 20150846. doi: 10.1098/rspa.2015.0846
|
Chen Y, Lv W, Li J, You Z. 2017. An extended family of rigidly foldable origami tubes. Journal of Mechanisms and Robotics, 9: 021002. doi: 10.1115/1.4035559
|
Chen Y, Lv W, Peng R, Wei G. 2019b. Mobile assemblies of four-spherical-4R-integrated linkages and the associated four-crease-integrated rigid origami patterns. Mechanism and Machine Theory, 142: 103613. doi: 10.1016/j.mechmachtheory.2019.103613
|
Chen Y, Peng R, You Z. 2015. Origami of thick panels. Science, 349: 396-400. doi: 10.1126/science.aab2870
|
Chen Y, You Z. 2009. Two-fold symmetrical 6R foldable frame and its bifurcations. International Journal of Solids Structures, 46: 4504-4514. doi: 10.1016/j.ijsolstr.2009.09.012
|
Chen Z, Wu T, Nian G, Shan Y, Liang X, Jiang H, Qu S. 2019c. Ron Resch origami pattern inspired energy absorption structures. Journal of Applied Mechanics, 86: 011005. doi: 10.1115/1.4041415
|
Chiang C-H. 1988. Kinematics of Spherical Mechanisms. Cambridge University Press.
|
Choi G P, Dudte L H, Mahadevan L. 2019. Programming shape using kirigami tessellations. Nature materials, 18: 999-1004. doi: 10.1038/s41563-019-0452-y
|
Choi G P, Dudte L H, Mahadevan L. 2021. Compact reconfigurable kirigami. Physical Review Research, 3: 043030. doi: 10.1103/PhysRevResearch.3.043030
|
Chu C C, Keong C K. 2017. The review on tessellation origami inspired folded structure//AIP Conference Proceedings, 020025. AIP Publishing LLC.
|
Connelly R, Sabitov I, Walz A. 1997. The bellows conjecture. Beitr. Algebra Geom, 38: 1-10.
|
Coulais C, Sabbadini A, Vink F, van Hecke M. 2018. Multi-step self-guided pathways for shape-changing metamaterials. Nature Materials, 561: 512-515.
|
Dai J S. 2012. Finite displacement screw operators with embedded Chasles’ motion. Journal of Mechanisms and Robotics, 4: 041002. doi: 10.1115/1.4006951
|
Dai J S, Rees Jones J. 1999. Mobility in metamorphic mechanisms of foldable/erectable kinds. Journal of Mechanical Design, 121: 375-382. doi: 10.1115/1.2829470
|
Davies T. 1981. Kirchhoff's circulation law applied to multi-loop kinematic chains. Mechanism and Machine Theory, 16: 171-183. doi: 10.1016/0094-114X(81)90033-1
|
De Temmerman I a N, Mollaert M, Van Mele I a T, De Laet I a L. 2007. Design and analysis of a foldable mobile shelter system. International Journal of Space Structures, 22: 161-168. doi: 10.1260/026635107782218868
|
Demaine E D, O'Rourke J. 2007. Geometric Folding Algorithms: Linkages, Origami, Polyhedra. Cambridge University Press.
|
Denavit J, Hartenberg R S. 1955. A kinematic notation for lower-pair mechanisms based on matrices. ASME Journal of Applied Mechanics, 22: 215-221. doi: 10.1115/1.4011045
|
Deng A, Ji B, Zhou X, You Z. 2020. Geometric design and mechanical properties of foldcores based on the generalized Resch patterns. Thin-Walled Structures, 148: 106516. doi: 10.1016/j.tws.2019.106516
|
Deng X, Zhao J, Cai J, Liu X. 2022. Tunable origami metamaterial with arbitrary single-curvature configuration. Mechanism and Machine Theory, 171: 104745. doi: 10.1016/j.mechmachtheory.2022.104745
|
Edmondson B J, Lang R J, Magleby S P, Howell L L. 2014. An offset panel technique for thick rigidily foldable origami//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V05BT08A054. American Society of Mechanical Engineers.
|
Edmondson B J, Lang R J, Morgan M R, Magleby S P, Howell L L. 2015. Thick rigidly foldable structures realized by an offset panel. Origami, 6: 149-161.
|
Evans T A, Lang R J, Magleby S P, Howell L L. 2015a. Rigidly foldable origami gadgets and tessellations. Royal Society Open Science, 2: 150067. doi: 10.1098/rsos.150067
|
Evans T A, Lang R J, Magleby S P, Howell L L. 2015b. Rigidly foldable origami twists. Origami, 6: 119-130.
|
Fang H, Zhang Y, Wang K. 2017. Origami-based earthworm-like locomotion robots. Bioinspiration and Biomimetics, 12: 065003. doi: 10.1088/1748-3190/aa8448
|
Farnham J, Hull T C, Rumbolt A. 2022. Rigid folding equations of degree-6 origami vertices. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Science, 478: 20220051. doi: 10.1098/rspa.2022.0051
|
Fei L J, Sujan D. 2013. Origami theory and its applications: a literature review. International Journal of Humanities and Social Sciences, 7: 229-233.
|
Felton S, Tolley M, Demaine E, Rus D, Wood R. 2014. A method for building self-folding machines. Science, 345: 644-646. doi: 10.1126/science.1252610
|
Feng F, Dang X, James R D, Plucinsky P. 2020a. The designs and deformations of rigidly and flat-foldable quadrilateral mesh origami. Journal of the Mechanics Physics of Solids, 142: 104018. doi: 10.1016/j.jmps.2020.104018
|
Feng H, Ma J, Chen Y. 2020b. Rigid folding of generalized waterbomb origami tubes. Chinese Journal of Mechanical engineering, 56: 143-159.
|
Feng H, Ma J, Chen Y, You Z. 2018a. Twist of tubular mechanical metamaterials based on waterbomb origami. Scientific reports, 8: 1-13.
|
Feng H, Peng R, Ma J, Chen Y. 2018b. Rigid foldability of generalized triangle twist origami pattern and its derived 6R linkages. Journal of Mechanisms and Robotics, 10: 051003. doi: 10.1115/1.4040439
|
Feng H, Peng R, Zang S, Ma J, Chen Y. 2020c. Rigid foldability and mountain-valley crease assignments of square-twist origami pattern. Mechanism and Machine Theory, 152: 103947. doi: 10.1016/j.mechmachtheory.2020.103947
|
Filipov E, Liu K, Tachi T, Schenk M, Paulino G H. 2017. Bar and hinge models for scalable analysis of origami. International Journal of Solids Structures, 124: 26-45. doi: 10.1016/j.ijsolstr.2017.05.028
|
Filipov E T, Tachi T, Paulino G H. 2015. Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials. Proceedings of the National Academy of Sciences, 112: 12321-12326. doi: 10.1073/pnas.1509465112
|
Fonseca L M, Savi M A. 2021. On the symmetries of the origami waterbomb pattern: kinematics and mechanical investigations. Meccanica, 56: 2575-2598. doi: 10.1007/s11012-021-01388-2
|
Gan W, Pellegrino S. 2003. Closed-loop deployable structures//44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1450.
|
Gan W W, Pellegrino S. 2006. Numerical approach to the kinematic analysis of deployable structures forming a closed loop. Journal of Mechanical Engineering Science, 220: 1045-1056. doi: 10.1243/09544062JMES245
|
Georgakopoulos S V, Zekios C L, Sattar-Kaddour A, Hamza M, Biswas A, et al. 2021. Origami antennas. IEEE Open Journal of Antennas Propagation, 2: 1020-1043. doi: 10.1109/OJAP.2021.3121102
|
Ghassaei A, Demaine E D, Gershenfeld N. 2018. Fast, interactive origami simulation using GPU computation, Origami, 7: 1151-1166.
|
Gillman A, Fuchi K, Buskohl P. 2018. Truss-based nonlinear mechanical analysis for origami structures exhibiting bifurcation and limit point instabilities. International Journal of Solids and Structures, 147: 80-93. doi: 10.1016/j.ijsolstr.2018.05.011
|
Gogu G. 2005. Mobility of mechanisms: a critical review. Mechanism and Machine Theory, 40: 1068-1097. doi: 10.1016/j.mechmachtheory.2004.12.014
|
Goldman F. 2011. Using the snapology technique to teach convex polyhedra//Fifth International Meeting of Origami Science, Mathematics, and Education, 99-110.
|
Grünbaum B, Shephard G C. 1987. Tilings and Patterns. Courier Dover Publications.
|
Gu Y, Chen Y. 2020. Origami cubes with one-DOF rigid and flat foldability. International Journal of Solids and Structures, 207: 250-261. doi: 10.1016/j.ijsolstr.2020.09.008
|
Gu Y, Chen Y. 2021. One-DOF origami boxes with rigid and flat foldability//IFToMM Asian Conference on Mechanism and Machine Science, 80-88. Springer.
|
Gu Y, Wei G, Chen Y. 2021. Thick-panel origami cube. Mechanism and Machine Theory, 164: 104411. doi: 10.1016/j.mechmachtheory.2021.104411
|
Guest S, Pellegrino S. 1992. Inextensional wrapping of flat membranes//Proceedings of the First International Seminar on Structural Morphology, Citeseer.
|
Guest S, Pellegrino S. 1996a. A new concept for solid surface deployable antennas. Acta Astronautica, 38: 103-113. doi: 10.1016/0094-5765(96)00009-4
|
Guest S D, Pellegrino S. 1994a. The folding of triangulated cylinders, part I: geometric considerations, Journal of Applied Mechanics, 61: 773-777.
|
Guest S D, Pellegrino S. 1994b. The folding of triangulated cylinders, part II: the folding process, Journal of Applied Mechanics, 61: 778-783.
|
Guest S D, Pellegrino S. 1996b. The folding of triangulated cylinders, part III: experiments, Journal of Applied Mechanics, 63: 77-83.
|
Hagiwara I. 2008. From origami to “Origamics”. The Japan Journal, 5: 22-25.
|
Hamilton W R. 1866. Elements of Quaternions. London: Longmans, Green, & Company.
|
Hartenberg R S, Danavit J. 1964. Kinematic Synthesis of Linkages. New York: McGraw-Hill.
|
He Z, Guest S D. 2020. On rigid origami II: quadrilateral creased papers. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Science, 476: 20200020. doi: 10.1098/rspa.2020.0020
|
Howell L L. 2013. Compliant Mechanisms. McCathy J, eds. 21st Century Kinematics. Springer.
|
Howell L L, Olsen B M, Magleby S P. 2013. Handbook of Compliant Mechanisms. John Wiley & Sons Ltd.
|
Huang C, Chen C. 1994. The linear representation of the screw triangle: a unification of finite and infinitesimal kinematics//In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 449-458.
|
Huang Z, Li Q. 2002. General methodology for type synthesis of symmetrical lower-mobility parallel manipulators and several novel manipulators. The International Journal of Robotics Research, 21: 131-145. doi: 10.1177/027836402760475342
|
Huang Z, Li Q. 2003. Type synthesis of symmetrical lower-mobility parallel mechanisms using the constraint-synthesis method. The International Journal of Robotics Research, 22: 59-79.
|
Hull T. 2012. Project Origami: Activities for Exploring Mathematics. CRC Press.
|
Hull T C. 2014. Counting mountain-valley assignments for flat folds. arXiv: 1410.5022.
|
Hull T C, Tachi T. 2017. Double-line rigid origami//Proceedings of the 11th Asian Forum on Graphic Science, Tokyo.
|
Hunt K H. 1978. Kinematic Geometry of Mechanisms. Oxford University Press, USA.
|
Iniguez-Rabago A, Li Y, Overvelde J T. 2019. Exploring multistability in prismatic metamaterials through local actuation. Nature Communications, 10: 1-10. doi: 10.1038/s41467-018-07882-8
|
Ionescu T G, Antonescu P, Biro I, Bögelsack G, Breteler A K. 2003. Terminology for the mechanism and machine science. Mechanism and Machine Theory, 38: 767-901. doi: 10.1016/S0094-114X(03)00015-6
|
Izmestiev I. 2017. Classification of flexible Kokotsakis polyhedra with quadrangular base. International Mathematics Research Notices, 2017: 715-808.
|
Jeong D, Lee K. 2018. Design and analysis of an origami-based three-finger manipulator. Robotica, 36: 261-274. doi: 10.1017/S0263574717000340
|
Jiao Z, Ji C, Zou J, Yang H, Pan M. 2019a. Vacuum‐powered soft pneumatic twisting actuators to empower new capabilities for soft robots. Advanced Materials Technologies, 4: 1800429. doi: 10.1002/admt.201800429
|
Jiao Z, Zhang C, Wang W, Pan M, Yang H, Zou J. 2019b. Advanced artificial muscle for flexible material‐based reconfigurable soft robots. Advanced Science, 6: 1901371. doi: 10.1002/advs.201901371
|
Justin J. 1986. Mathematics of origami, part 9. British Origami, 118: 28-30.
|
Justin J. 1994. Mathematical remarks about origami bases. Symmetry:Culture Science, 5: 153-165.
|
Kawasaki T, Yoshida M. 1988. Crystallographic flat origamis. Memoirs of the Faculty of Science, Kyushu University. Series A, Mathematics, 42: 153-157. doi: 10.2206/kyushumfs.42.153
|
Kokotsakis A. 1933. Über bewegliche polyeder. Mathematische Annalen, 107: 627-647. doi: 10.1007/BF01448912
|
Kresling B. 2002. Folded tubes as compared to kikko (‘tortoise-shell55’) bamboo. Origami, 3: 197-207.
|
Kshad M A E, Popinigis C, Naguib H E. 2018. 3D printing of Ron-Resch-like origami cores for compression and impact load damping. Smart Materials Structures, 28: 015027.
|
Ku J S, Demaine E D. 2016. Folding flat crease patterns with thick materials. Journal of Mechanisms and Robotics, 8: 031003. doi: 10.1115/1.4031954
|
Kuipers J B. 1999. Quaternions and Rotation Sequences: A Primer with Applications to Orbits, Aerospace, and Virtual Reality. Princeton University Press.
|
Kumar P, Pellegrino S. 2000. Computation of kinematic paths and bifurcation points. International Journal of Solids and Structures, 37: 7003-7027. doi: 10.1016/S0020-7683(99)00327-3
|
Kuribayashi K, Tsuchiya K, You Z, Tomus D, Umemoto M, Ito T, Sasaki M. 2006. Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil. Materials Science Engineering:A, 419: 131-137. doi: 10.1016/j.msea.2005.12.016
|
Lam T. 2003. Hamilton's Quaternions. Elsevier.
|
Lang R J. 2015. Treemaker. https://www.langorigami.com/article/treemaker/.
|
Lang R J. 2017. Twists, Tilings, and Tessellations: Mathematical Methods for Geometric Origami. AK Peters/CRC Press.
|
Lang R J, Brown N, Ignaut B, Magleby S, Howell L. 2020. Rigidly foldable thick origami using designed-offset linkages. Journal of Mechanisms and Robotics, 12: 021106.
|
Lang R J, Howell L. 2018. Rigidly foldable quadrilateral meshes from angle arrays. Journal of Mechanisms and Robotics, 10: 021004.
|
Lang R J, Howell L L. 2022. Laminar emergent flexural fold joints: Planar compliant mechanisms with large-angle near-revolute motion. Extreme Mechanics Letters, 52: 101657. doi: 10.1016/j.eml.2022.101657
|
Lang R J, Magleby S, Howell L. 2016. Single degree-of-freedom rigidly foldable cut origami flashers. Journal of Mechanisms and Robotics, 8: 031005. doi: 10.1115/1.4032102
|
Lang R J, Nelson T, Magleby S, Howell L. 2017. Thick rigidly foldable origami mechanisms based on synchronized offset rolling contact elements. Journal of Mechanisms and Robotics, 9: 021013. doi: 10.1115/1.4035686
|
Lang R J, Tolman K A, Crampton E B, Magleby S P, Howell L L. 2018. A review of thickness-accommodation techniques in origami-inspired engineering. Applied Mechanics Reviews, 70: 010805.
|
Lee D-Y, Kim S-R, Kim J-S, Park J-J, Cho K-J. 2017. Origami wheel transformer: a variable-diameter wheel drive robot using an origami structure. Soft robotics, 4: 163-180. doi: 10.1089/soro.2016.0038
|
Lee T-U, Yang X, Ma J, Chen Y, Gattas J M. 2019. Elastic buckling shape control of thin-walled cylinder using pre-embedded curved-crease origami patterns. International Journal of Mechanical Sciences, 151: 322-330. doi: 10.1016/j.ijmecsci.2018.11.005
|
Li Y. 2020. Motion paths finding for multi-degree-of-freedom mechanisms. International Journal of Mechanical Sciences, 185: 105709. doi: 10.1016/j.ijmecsci.2020.105709
|
Li Y, Yin J. 2021. Metamorphosis of three-dimensional kirigami-inspired reconfigurable and reprogrammable architected matter. Materials Today Physics, 21: 100511. doi: 10.1016/j.mtphys.2021.100511
|
Li Y, Zhang Q, Hong Y, Yin J. 2021. 3D transformable modular Kirigami based programmable metamaterials. Advanced Functional Materials, 31: 2105641. doi: 10.1002/adfm.202105641
|
Lin Y, Yang G, Liang Y, Zhang C, Wang W, Qian D, Yang H, Zou J. 2020. Controllable stiffness origami “skeletons” for lightweight and multifunctional artificial muscles. Advanced Functional Materials, 30: 2000349. doi: 10.1002/adfm.202000349
|
Liu K, Paulino G H. 2016. MERLIN: A MATLAB implementation to capture highly nonlinear behavior of non-rigid origami//Proceedings of IASS Annual Symposia, 1-10.
|
Liu K, Paulino G H. 2018. Highly efficient nonlinear structural analysis of origami assemblages using the MERLIN2 software, Origami, 7: 1167-1182.
|
Liu L, Choi G P, Mahadevan L. 2021a. Wallpaper group kirigami. Proceedings of the Royal Society A:Mathematical, Physical, 477: 20210161.
|
Liu P, Ma J, Chen Y, Yuan L, Zhao H, Wang K. 2021b. The kinematic analysis and bistable characteristics of the winding origami structure//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V08BT08A032. American Society of Mechanical Engineers.
|
Liu S. 2014. Deployable structure associated with rigid origami and its mechanics. [PhD thesis]. Singapore: School of Mechanical and Aerospace Engineering, Nanyang Technological University.
|
Liu S, Lv W, Chen Y, Lu G. 2016. Deployable prismatic structures with rigid origami patterns. Journal of Mechanisms and Robotics, 8: 031002. doi: 10.1115/1.4031953
|
Liu W, Jiang H, Chen Y. 2022. 3D programmable metamaterials based on reconfigurable mechanism modules. Advanced Functional Materials, 32: 2109865. doi: 10.1002/adfm.202109865
|
Liu Z, Fang H, Xu J, Wang K. 2021c. A novel origami mechanical metamaterial based on Miura-variant designs: exceptional multistability and shape reconfigurability. Smart Materials Structures, 30: 085029. doi: 10.1088/1361-665X/ac0d0f
|
Lv C, Krishnaraju D, Konjevod G, Yu H, Jiang H. 2014. Origami based mechanical metamaterials. Scientific Reports, 4: 1-6.
|
Ma J, Chai S, Chen Y. 2022a. Geometric design, deformation mode, and energy absorption of patterned thin-walled structures. Mechanics of Materials, 168: 104269. doi: 10.1016/j.mechmat.2022.104269
|
Ma J, Feng H, Chen Y, Hou D, You Z. 2020. Folding of tubular waterbomb. Research, 2020: 1735081.
|
Ma J, Jiang X, Chen Y. 2022b. A 3D modular meta-structure with continuous mechanism motion and bistability. Extreme Mechanics Letters, 51: 101584. doi: 10.1016/j.eml.2021.101584
|
Ma J, Song J, Chen Y. 2018. An origami-inspired structure with graded stiffness. International Journal of Mechanical Sciences, 136: 134-142. doi: 10.1016/j.ijmecsci.2017.12.026
|
Ma J, You Z. 2013. Energy absorption of thin-walled beams with a pre-folded origami pattern. Thin-Walled Structures, 73: 198-206. doi: 10.1016/j.tws.2013.08.001
|
Ma J, Zang S, Feng H, Chen Y, You Z. 2021. Theoretical characterization of a non-rigid-foldable square-twist origami for property programmability. International Journal of Mechanical Sciences, 189: 105981. doi: 10.1016/j.ijmecsci.2020.105981
|
Magliozzi L, Micheletti A, Pizzigoni A, Ruscica G. 2017. On the design of origami structures with a continuum of equilibrium shapes. Composites Part B:Engineering, 115: 144-150. doi: 10.1016/j.compositesb.2016.10.023
|
Maxwell J C. 1864. On the calculation of the equilibrium and stiffness of frames. The London, Edinburgh, Dublin Philosophical Magazine, 27: 294-299. doi: 10.1080/14786446408643668
|
Mazzucchi A. 2018. A kinetic module for modular structures based on rigid origami. Nexus Network Journal, 20: 41-57. doi: 10.1007/s00004-017-0351-y
|
McCarthy J M. 1990. Introduction to theoretical kinematics. MIT Press.
|
Meloni M, Cai J, Zhang Q, Sang‐Hoon Lee D, Li M, Ma R, Parashkevov T E, Feng J. 2021. Engineering origami: a comprehensive review of recent applications, design methods, and tools. Advanced Science, 8: 2000636. doi: 10.1002/advs.202000636
|
Micheletti A, Giannetti I, Mattei G, Tiero A. 2022. Kinematic and static design of rigid origami structures: Application to modular yoshimura patterns. Journal of Architectural Engineering, 28: 04022009. doi: 10.1061/(ASCE)AE.1943-5568.0000531
|
Mitani J. 2017. 3D Origami Art. CRC Press.
|
Miura K. 1985. Method of packaging and deployment of large membranes in space. The Institute of Space Astronautical Science report: 1-9.
|
Miura K, Tachi T. 2010. Synthesis of rigid-foldable cylindrical polyhedra. Symmetry: Art Science, 1: 204-213.
|
Miyashita S, Guitron S, Yoshida K, Li S, Damian D D, Rus D. 2016. Ingestible, controllable, and degradable origami robot for patching stomach wounds//2016 IEEE International Conference on Robotics and Automation (ICRA), 909-916.IEEE.
|
Morgan M R, Lang R J, Magleby S P, Howell L L. 2016. Towards developing product applications of thick origami using the offset panel technique. Mechanical Sciences, 7: 69-77. doi: 10.5194/ms-7-69-2016
|
Mousanezhad D, Kamrava S, Vaziri A. 2017. Origami-based building blocks for modular construction of foldable structures. Scientific Reports, 7: 1-8. doi: 10.1038/s41598-016-0028-x
|
Mukhopadhyay T, Ma J, Feng H, Hou D, Gattas J M, Chen Y, You Z. 2020. Programmable stiffness and shape modulation in origami materials: Emergence of a distant actuation feature. Applied Materials Today, 19: 100537. doi: 10.1016/j.apmt.2019.100537
|
Myard F E. 1931. Contribution à la géométrie des systèmes articulés. Bulletin de la Société Mathématique de France, 59: 183-210.
|
Novelino L S, Ze Q, Wu S, Paulino G H, Zhao R. 2020. Untethered control of functional origami microrobots with distributed actuation. Proceedings of the National Academy of Sciences, 117: 24096-24101. doi: 10.1073/pnas.2013292117
|
Onal C D, Wood R J, Rus D. 2012. An origami-inspired approach to worm robots. IEEE/ASME Transactions on Mechatronics, 18: 430-438.
|
Ou J, Ma Z, Peters J, Dai S, Vlavianos N, Ishii H. 2018. KinetiX-designing auxetic-inspired deformable material structures. Computers Graphics, 75: 72-81. doi: 10.1016/j.cag.2018.06.003
|
Overvelde J T, De Jong T A, Shevchenko Y, Becerra S A, Whitesides G M, Weaver J C, Hoberman C, Bertoldi K. 2016. A three-dimensional actuated origami-inspired transformable metamaterial with multiple degrees of freedom. Nature Communications, 7: 1-8.
|
Overvelde J T, Weaver J C, Hoberman C, Bertoldi K. 2017. Rational design of reconfigurable prismatic architected materials. Nature Communications, 541: 347-352. doi: 10.1038/nature20824
|
Pehrson N A, Magleby S P, Lang R J, Howell L L. 2016. Introduction of monolithic origami with thick-sheet materials//Proceedings of IASS Annual Symposia, 1-10.
|
Pellegrino S. 1990. Analysis of prestressed mechanisms. International Journal of Solids and Structures, 26: 1329-1350. doi: 10.1016/0020-7683(90)90082-7
|
Pellegrino S. 1993. Structural computations with the singular value decomposition of the equilibrium matrix. International Journal of Solids and Structures, 30: 3025-3035. doi: 10.1016/0020-7683(93)90210-X
|
Pellegrino S, Calladine C R. 1986. Matrix analysis of statically and kinematically indeterminate frameworks. International Journal of Solids and Structures, 22: 409-428. doi: 10.1016/0020-7683(86)90014-4
|
Peng R, Chen Y. 2014. The metamaterial generated from rigid-origami pattern//The 6th International Meeting on Origami in Science, Mathematics and Education, Tokyo, Japan, August.
|
Peng R, Ma J, Chen Y. 2018. The effect of mountain-valley folds on the rigid foldability of double corrugated pattern. Mechanism and Machine Theory, 128: 461-474. doi: 10.1016/j.mechmachtheory.2018.06.012
|
Pratapa P P, Liu K, Paulino G H. 2019. Geometric mechanics of origami patterns exhibiting Poisson’s ratio switch by breaking mountain and valley assignment. Physical Review Letters, 122: 155501. doi: 10.1103/PhysRevLett.122.155501
|
Pratapa P P, Liu K, Paulino G H. 2020. Kinematics of the morph origami pattern and its hybrid states//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V010T010A076. American Society of Mechanical Engineers.
|
Pratapa P P, Liu K, Vasudevan S P, Paulino G H. 2021. Reprogrammable kinematic branches in tessellated origami structures. Journal of Mechanisms and Robotics, 13: 031004. doi: 10.1115/1.4049949
|
Qiu C, Zhang K, Dai J S. 2016. Repelling-screw based force analysis of origami mechanisms. Journal of Mechanisms and Robotics, 8: 031001. doi: 10.1115/1.4031458
|
Rafsanjani A, Pasini D. 2016. Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs. Extreme Mechanics Letters, 9: 291-296. doi: 10.1016/j.eml.2016.09.001
|
Randlett S. 1963. The Art of Origami: Paper Folding, Traditional and Modern. Faber & Faber.
|
Resch R D. 1965. Geometrical device having articulated relatively movable sections. U.S. Patent 3201894.
|
Resch R D. 1968. Self-supporting structural unit having a series of repetitious geometrical modules. U.S. Patent 3407558.
|
Resch R D. 1973. The topological design of sculptural and architectural systems//Proceedings of the June 4-8, 1973, National Computer Conference and Exposition, 643-650.
|
Reuleaux F. 1875. The Kinematics of Machinery. London. Macmillan and Co.
|
Salazar R, Murthy S, Pellazar C, Stoica A. 2017. Transformers for lunar extreme environments: large origami deployable solar reflectors//2017 IEEE Aerospace Conference, 1-7.IEEE.
|
Sarrus P. 1853. Note Sur la transformation des mouvements rectilignes alternatifs, en mouvements circulaires, et reciproquement, comptes. rendus. Acad. Sci. , Paris, 36: 1036.
|
Schenk M, Guest S D. 2011. Origami folding: a structural engineering approach. Origami, 5: 291-304.
|
Schenk M, Guest S D. 2013. Geometry of Miura-folded metamaterials. Proceedings of the National Academy of Sciences, 110: 3276-3281. doi: 10.1073/pnas.1217998110
|
Song C, Chen Y. 2012. Multiple linkage forms and bifurcation behaviours of the double-subtractive-Goldberg 6R linkage. Mechanism and Machine Theory, 57: 95-110. doi: 10.1016/j.mechmachtheory.2012.07.002
|
Stachel H. 2010. A kinematic approach to Kokotsakis meshes. Computer Aided Geometric Design, 27: 428-437. doi: 10.1016/j.cagd.2010.05.002
|
Stavric M, Wiltsche A. 2014. Quadrilateral patterns for rigid folding structures. International Journal of Architectural Computing, 12: 61-79. doi: 10.1260/1478-0771.12.1.61
|
Sun T, Yang S, Huang T, Dai J S. 2017. A way of relating instantaneous and finite screws based on the screw triangle product. Mechanism and Machine Theory, 108: 75-82.
|
Tachi T. 2009. Generalization of rigid-foldable quadrilateral-mesh origami. Journal of the International Association for Shell Spatial Structures, 50: 173-179.
|
Tachi T. 2010a. “Freeform Origami”. www.tsg.ne.jp/TT/software/.
|
Tachi T. 2010b. Freeform rigid-foldable structure using bidirectionally flat-foldable planar quadrilateral mesh. Advances in Architectural Geometry, 14: 203-215.
|
Tachi T. 2010c. Geometric considerations for the design of rigid origami structures//Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium, 458-460. Elsevier Ltd.
|
Tachi T. 2010d. One-DOF cylindrical deployable structures with rigid quadrilateral panels//Symposium of the International Association for Shell and Spatial Structures (50th. 2009. Valencia). Evolution and Trends in Design, Analysis and Construction of Shell and Spatial Structures: Proceedings. Editorial Universitat Politècnica de València.
|
Tachi T. 2011. Rigid-foldable thick origami. Origami, 5: 253-264.
|
Tachi T. 2013. Designing freeform origami tessellations by generalizing Resch's patterns. Journal of Mechanical Design, 135: 111006. doi: 10.1115/1.4025389
|
Tachi T, Masubuchi M, Iwamoto M. 2012. Rigid origami structures with vacuumatics: geometric considerations//Proc. the IASS-APCS Seoul, Korea, 21–24 May.
|
Tang J, Tian M, Wang C, Wang X, Mao H. 2021. A novel scheme of folding discretized surfaces of revolution inspired by waterbomb origami. Mechanism and Machine Theory, 165: 104431. doi: 10.1016/j.mechmachtheory.2021.104431
|
Tang Y, Li Y, Hong Y, Yang S, Yin J. 2019. Programmable active kirigami metasheets with more freedom of actuation. Proceedings of the National Academy of Sciences, 116: 26407-26413. doi: 10.1073/pnas.1906435116
|
Tarnai T. 2001. Infinitesimal and finite mechanisms. //Pellegrinos eds. Deployable Structures. New York: Springer, 2001.
|
Tolman K A, Lang R J, Magleby S P, Howell L L. 2017. Split-vertex technique for thickness-accommodation in origami-based mechanisms//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V05BT08A054. American Society of Mechanical Engineers.
|
Turner N, Goodwine B, Sen M. 2016. A review of origami applications in mechanical engineering. Journal of Mechanical Engineering Science, 230: 2345-2362. doi: 10.1177/0954406215597713
|
Varadarajan V. 1974. Lie GRoups, Lie Algebras, and Their Representations. Prentice-Hall.
|
Vasudevan S P, Pratapa P P. 2021. Origami metamaterials with near-constant poisson functions over finite strains. Journal of Engineering Mechanics, 147: 04021093.
|
Wang C, Guo H, Liu R, Deng Z. 2022a. A programmable origami-inspired space deployable structure with curved surfaces. Engineering Structures, 256: 113934. doi: 10.1016/j.engstruct.2022.113934
|
Wang C, Li J, Zhang D. 2021. Optimization design method for kirigami-inspired space deployable structures with cylindrical surfaces. Applied Mathematical Modelling, 89: 1575-1598. doi: 10.1016/j.apm.2020.07.005
|
Wang K, Chen Y. 2011. Folding a patterned cylinder by rigid origami, Origami, 5: 265-276.
|
Wang L-C, Song W-L, Fang D. 2018. Twistable origami and kirigami: from structure-guided smartness to mechanical energy storage. ACS Applied Materials and Interfaces, 11: 3450-3458.
|
Wang L C, Song W L, Zhang Y J, Qu M J, Zhao Z, Chen M, Yang Y, Chen H, Fang D. 2020. Active reconfigurable tristable square‐twist origami. Advanced Functional Materials, 30: 1909087. doi: 10.1002/adfm.201909087
|
Wang S, Gao Y, Huang H, Li B, Guo H, Liu R. 2022b. Design of deployable curved-surface rigid origami flashers. Mechanism and Machine Theory, 167: 104512. doi: 10.1016/j.mechmachtheory.2021.104512
|
Warisaya K, Hamanaka H, Tokolo A, Tachi T. 2021. Auxetic structures based on rhombic tiling//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V08BT08A031. American Society of Mechanical Engineers.
|
Watanabe N, Kawaguchi K. 2009. The method for judging rigid foldability. Origami, 4: 165-174.
|
Webb D, Hirsch B, Bach V, Sauder J F, Bradford S, Thomson M. 2016. Starshade mechanical architecture & technology effort//3rd AIAA Spacecraft Structures Conference, 2165.
|
Wei G, Dai J S. 2014. Origami-inspired integrated planar-spherical overconstrained mechanisms. Journal of Mechanical Design, 136: 051003. doi: 10.1115/1.4025821
|
Wei G, Ding X, Dai J S. 2010. Mobility and geometric analysis of the Hoberman switch-pitch ball and its variant. Journal of Mechanisms and Robotics, 2: 031010. doi: 10.1115/1.4001730
|
Wohlhart K. 2001. Regular polyhedral linkages//Proceedings of the 2nd Workshop on Computational Kinematics, Seoul: 239-248.
|
Wu W, You Z. 2010. Modelling rigid origami with quaternions and dual quaternions. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Science, 466: 2155-2174. doi: 10.1098/rspa.2009.0625
|
Wu W, You Z. 2011. A solution for folding rigid tall shopping bags. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 467: 2561-2574. doi: 10.1098/rspa.2011.0120
|
Xu R, Zhang X, Ma J, Chen Y, Cao Y, You Z. 2018. Folding a rigid flat surface around a square hub//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V05BT07A060. American Society of Mechanical Engineers.
|
Yamaguchi K, Yasuda H, Tsujikawa K, Kunimine T, Yang J. 2022. Graph-theoretic estimation of reconfigurability in origami-based metamaterials. Materials and Design, 213: 110343. doi: 10.1016/j.matdes.2021.110343
|
Yang F, Chen Y, Kang R, Ma J. 2016a. Truss transformation method to obtain the non-overconstrained forms of 3D overconstrained linkages. Mechanism and Machine Theory, 102: 149-166. doi: 10.1016/j.mechmachtheory.2016.04.005
|
Yang F, Zhang M, Ma J, You Z, Yu Y, Chen Y, Paulino G H. 2022a. Design of single degree-of-freedom triangular resch patterns with thick-panel origami. Mechanism and Machine Theory, 169: 104650. doi: 10.1016/j.mechmachtheory.2021.104650
|
Yang J, Zhang X, Chen Y, You Z. 2022b. Folding arrays of uniform-thickness panels to compact bundles with a single degree of freedom. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Science, 478: 20220043. doi: 10.1098/rspa.2022.0043
|
Yang S, Sun T, Huang T, Li Q, Gu D. 2016b. A finite screw approach to type synthesis of three-DOF translational parallel mechanisms. Mechanism and Machine Theory, 104: 405-419.
|
Yang Y, Maiolino P, Chen Y, You Z. 2021. Three-dimensional kinematic metamaterial with tuneable directional permeability, arXiv preprint arXiv: 2102.08821.
|
Yang Y, You Z. 2018a. 3D construction of a tilted cuboid mechanical metamaterial//ASME International Mechanical Engineering Congress and Exposition, V009T012A021. American Society of Mechanical Engineers.
|
Yang Y, You Z. 2018b. Geometry of transformable metamaterials inspired by modular origami. Journal of Mechanisms and Robotics, 10: 021001. doi: 10.1115/1.4038969
|
Yang Y, You Z. 2018c. A modular origami-inspired mechanical metamaterial. Origami, 7: 715-730.
|
Yasuda H, Miyazawa Y, Charalampidis E G, Chong C, Kevrekidis P G, Yang J. 2019. Origami-based impact mitigation via rarefaction solitary wave creation. Science advances, 5: eaau2835. doi: 10.1126/sciadv.aau2835
|
Yasuda H, Tachi T, Lee M, Yang J. 2017. Origami-based tunable truss structures for non-volatile mechanical memory operation. Nature Communications, 8.
|
Yasuda H, Yein T, Tachi T, Miura K, Taya M. 2013. Folding behaviour of Tachi–Miura polyhedron bellows. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 469: 20130351. doi: 10.1098/rspa.2013.0351
|
Ye H, Ma J, Zhou X, Wang H, You Z. 2019. Energy absorption behaviors of pre-folded composite tubes with the full-diamond origami patterns. Composite Structures, 221: 110904. doi: 10.1016/j.compstruct.2019.110904
|
Ye H, Zhou X, Ma J, Wang H, You Z. 2020. Axial crushing behaviors of composite pre-folded tubes made of KFRP/CFRP hybrid laminates. Thin-Walled Structures, 149: 106649. doi: 10.1016/j.tws.2020.106649
|
Yellowhorse A, Lang R J, Tolman K, Howell L L. 2018. Creating linkage permutations to prevent self-intersection and enable deployable networks of thick-origami. Scientific Reports, 8: 1-9.
|
Yellowhorse A D, Brown N, Howell L L. 2020. Design of regular one-dimensional, two-dimensional, and three-dimensional linkage-based tessellations. Journal of Mechanisms and Robotics, 12: 021104. doi: 10.1115/1.4045936
|
Yoshimura Y. 1955. On the mechanism of buckling of a circular cylindrical shell under axial compression//National Advisory Committee for Aeronautics Technical Memorandum.
|
You Z, Chen Y. 2011. Motion Structures: Deployable Structural Assemblies of Mechanisms. Crc Press.
|
Yu Y, Chen Y, Paulino G H. 2019. On the unfolding process of triangular Resch patterns: a finite particle method investigation//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V05BT07A048. American Society of Mechanical Engineers.
|
Zang S, Ma J, You Z, Chen Y. 2022. Deformation characteristics and mechanical properties tuning of a non-rigid square-twist origami structure with rotational symmetry. Thin-Walled Structures, 179: 109570. doi: 10.1016/j.tws.2022.109570
|
Zhai Z, Wang Y, Jiang H. 2018. Origami-inspired, on-demand deployable and collapsible mechanical metamaterials with tunable stiffness. Proceedings of the National Academy of Sciences, 115: 2032-2037. doi: 10.1073/pnas.1720171115
|
Zhakypov Z, Paik J. 2018. Design methodology for constructing multimaterial origami robots and machines. IEEE Transactions on Robotics, 34: 151-165. doi: 10.1109/TRO.2017.2775655
|
Zhang K, Dai J S. 2013. Classification of origami-enabled foldable linkages and emerging applications//International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, V06BT07A024. American Society of Mechanical Engineers.
|
Zhang K, Fang Y, Fang H, Dai J S. 2010. Geometry and constraint analysis of the three-spherical kinematic chain based parallel mechanism. Journal of Mechanisms and Robotics, 2: 191-200.
|
Zhang T, Kawaguchi K i, Wu M. 2018. A folding analysis method for origami based on the frame with kinematic indeterminacy. International Journal of Mechanical Sciences, 146: 234-248.
|
Zhang X, Chen Y. 2018a. The diamond thick-panel origami and the corresponding mobile assemblies of plane-symmetric Bricard linkages. Mechanism and Machine Theory, 130: 585-604. doi: 10.1016/j.mechmachtheory.2018.09.005
|
Zhang X, Chen Y. 2018b. Mobile assemblies of Bennett linkages from four-crease origami patterns. Proceedings of the Royal Society A:Mathematical, Physical and Engineering Sciences, 474: 20170621. doi: 10.1098/rspa.2017.0621
|
Zhang X, Chen Y. 2019. Vertex-splitting on a diamond origami pattern. Journal of Mechanisms and Robotics, 11: 031014. doi: 10.1115/1.4043214
|
Zhang X, Ma J, Li M, You Z, Wang X, Luo Y, Ma K, Chen Y. 2022. Kirigami-based metastructures with programmable multistability. Proceedings of the National Academy of Sciences, 119: e2117649119. doi: 10.1073/pnas.2117649119
|
Zhao Y, Endo Y, Kanamori Y, Mitani J. 2018a. Approximating 3D surfaces using generalized waterbomb tessellations. Journal of Computational Design Engineering, 5: 442-448. doi: 10.1016/j.jcde.2018.01.002
|
Zhao Y, Kanamori Y, Mitani J. 2018b. Design and motion analysis of axisymmetric 3D origami with generic six-crease bases. Computer Aided Geometric Design, 59: 86-97. doi: 10.1016/j.cagd.2017.10.002
|
Zhao Y, Li S, Zhang M, Zeng L, Yang Y, Kanamori Y, Mitani J. 2021. Computational design methods for cylindrical and axisymmetric waterbomb tessellations. Computer Aided Geometric Design, 91: 102037. doi: 10.1016/j.cagd.2021.102037
|
Zhou C, Wang B, Ma J, You Z. 2016. Dynamic axial crushing of origami crash boxes. International Journal of Mechanical Sciences, 118: 1-12. doi: 10.1016/j.ijmecsci.2016.09.001
|
Zimmermann L, Shea K, Stanković T. 2020. Conditions for rigid and flat foldability of degree-n vertices in origami. Journal of Mechanisms and Robotics, 12: 011020. doi: 10.1115/1.4045249
|
Zimmermann L, Stanković T. 2020. Rigid and flat foldability of a degree-four vertex in origami. Journal of Mechanisms and Robotics, 12: 011004. doi: 10.1115/1.4044737
|
Zirbel S A, Lang R J, Thomson M W, Sigel D A, Walkemeyer P E, Trease B P, Magleby S P, Howell L L. 2013. Accommodating thickness in origami-based deployable arrays. Journal of Mechanical Design, 135: 111005. doi: 10.1115/1.4025372
|