ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL

doi:10.6052/1000-0992-2000-2-J1998-021

Volume 30 Issue 2

May 2000

Turn off MathJax

Article Contents

Article Navigation > Advances in Mechanics > 2000 > 30(2): 252-271

ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL[J]. Advances in Mechanics, 2000, 30(2): 252-271. doi: 10.6052/1000-0992-2000-2-J1998-021

Citation:

ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL[J]. Advances in Mechanics, 2000, 30(2): 252-271. doi: 10.6052/1000-0992-2000-2-J1998-021

ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL[J]. Advances in Mechanics, 2000, 30(2): 252-271. doi: 10.6052/1000-0992-2000-2-J1998-021

Citation:

ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL[J]. Advances in Mechanics, 2000, 30(2): 252-271. doi: 10.6052/1000-0992-2000-2-J1998-021

PDF( 1690 KB)

ADVXNCES IN DYNAMIC SIMULATION OF STAMPING OF AUTOBODY MNEL

doi: 10.6052/1000-0992-2000-2-J1998-021

上海交通大学汽车工程研究所

Publish Date: 2000-05-25

Abstract

Abstract

In the paper the key technologies in the dynamic simulation of stamping of autobody panels, such as material model, finite element method, contact and friction, initial blank shape, and die and technical factors are summarized. The research advances in these technology fields are reviewd. The problems in the application and the tendency of development in the future are discussed.
- autobody panel,
- stamping,
- simulation,
- finite element analysis