| Citation: | WANG Xiaohui, YAO Weixing. Progress in research on fea models of adhesively bonded composite joints[J]. Advances in Mechanics, 2012, 42(5): 562-571. doi: 10.6052/1000-0992-11-101
|
The strength analysis methods of adhesive bonded structure can be classified into two types,i.e.,analytical method and numerical method,and the numerical method is mainly finite element method.In this paper,the finite element analysis methods for composite adhesive bonding structures are summarized,and based on the physical mechanism of the methods,the main FEM analysis methods of adhesively bonded composite joints are classified into three types,i.e.,stress-based model,fracture mechanics-based model and damage mechanics-based model.3D stress-based model,VCCT model and CZM model have been summarized in details,including their basic concepts,range of applications,advantages and disadvantages,improvements and extension as well as the implementation procedures.The recent progresses and necessary comments have also been reviewed in the present paper.These methods have been compared and analyzed from three aspects in the fifth part,such as the scope,singular stress and failure criterion,and further development trends in this area are also prospected.
|
1 游敏,郑晓玲.胶接强度分析及应用.武汉:华中科技大学出版社,2009.1-2
|
|
2 赵波.刚度非平衡胶接接头的的二维应力分析方法.工程力学,2008,25(12):6-13
|
|
3 Owens J F P,Lee-Sullivan P.Stiffness behaviour due to fracture in adhesively bonded composite to Aluminum joints:I theoretical model.International Journal of Adhesion and Adhesives,2000,20(1):39-45
|
|
4 Wooley G R,Carver D R.Stress concentration factors for bonded lap joint.Journal of Aircraft,1971,8:817-820
|
|
5 Goland M,Reissner E.The stresses in cemented joints.Journal of Applied Mechanics,ASME,1944,11(1):A17-A27
|
|
6 Khalili S M R,Khalili S.Numerical study of lap joints with composite adhesives and composite adherends subjected to in-plane and transverse loads.International Journal of Adhesion and Adhesives,2008,28(8):411-418
|
|
7 Amijima S,Fujii T.A microcomputer program for stress analysis of adhesive-bonded joints.International Journal of Adhesion and Adhesives,1987,7(4):199-204
|
|
8 Naboulsi S,Mall S.Thermal effects on adhesively bonded composite repair of cracked aluminum panels.Theoretical and Applied Fracture Mechanics,1997,26:1-12
|
|
9 Yadagiri S,Papi R C,Sanjeeva R T.Visco-elastic analysis of adhesively bonded joints.Composite Structures,1987,27:445-454
|
|
10 Lucas F M D S,Paulo J C D N,Adams R D.Analytical models of adhesively bonded joints-Part II:Comparative study.International Journal of Adhesion and Adhesives,2009,29:331-341
|
|
11 He X C.A review of finite element analysis of adhesively bonded joints.International Journal of Adhesion and Adhesives,2011,31(4):248-264
|
|
12 Wanga C H,Gunnion A J.Optimum shapes of scarf repairs,Composites:Part A,2009,40(9):1407-1418
|
|
13 Reis P N B,Ferreira J A M.Effect of adherend's rigidity on the shear strength of single lap adhesive joints.International Journal of Adhesion and Adhesives,2011,31:193-201
|
|
14 Rossettos J N,Zang E.On the peak stresses in adhesive joints with voids.Journal of Applied Mechanics,1993,60:559-570
|
|
15 Rossettos J N,Lin P,Nayeb-Hashemi H.Comparison of the effects of debonds and voids in adhesive joints.Journal of Engineering Materials and Technology,1994,116:533-538
|
|
16 游敏,严沾谋.有间隙胶接劈裂接头应力分布的数值模拟.中国机械工程,2007,18 (1):101-104
|
|
17 关志东,Yang Chihdar.复合材料管接头拉扭作用下胶层应力分析.复合材料学报,2004,21(3):96-101
|
|
18 Andruet R H,Dillard D A.Two and three dim-ensional geometrical nonlinear finite elements for analysis of adhesive joints.International Journal of Adhesion and Adhesives,2001,21:17-34
|
|
19 Tan C,Hoang N.Simulation of single-lap bonded and hybrid (bolted/bonded) joints with flexible adhesive.International Journal of Adhesion and Adhesives,2010,30:117-129
|
|
20 Kumar S,Pandey P C.Fatigue life prediction of adhesively bonded single lap joints.International Journal of Adhesion and Adhesives,2011,31:43-47
|
|
21 Soutis C,Duan D M,Goutas P.Compressive behaviour of CFRP laminates repaired with adhesively bonded external repairs.Composite Structures,1999,45(4):289-301
|
|
22 Wang C H,Gunnion A.Design methodology for scarf repairs to composite structures,Defence Science and Technology Organisation,AR-013-718,August,2006
|
|
23 Rispler A R,Tong L Y.Shape optimization of adhesive fillets.International Journal of Adhesion and Adhesives,2000,20:221-231
|
|
24 Bernasconi A,Beretta S,Moroni F,et al.Local stress analysis of the fatigue behaviour of adhesively bonded thick composite laminates.The Journal of Adhesion,2010,86(5-6):480-500
|
|
25 范学领.复合材料层间开裂数值计算及混合模式扩展准则研究:[博士论文].西安:西北工业大学,2009
|
|
26 徐修祝,涂善东,徐思浩.胶接接头断裂及相关断裂准则探讨.石油化工设备,2005,34(3):37-40
|
|
27 李亚智,黄其青,傅祥炯.含裂纹结构剩余强度的一种估算方法.机械强度,2003,25(1):71-75
|
|
28 Rybichi E F,Kanninen M F.A finite element calculation of stress intensity factors by a modified crack closure integral.Engineering Fracture Mechanics,1977,9:931-938
|
|
29 Lee S Y,Park D Y.Buckling analysis of laminated composite plates containing delaminations using the enhanced assumed strain solid element.International Journal of Solids and Structures,2007,44:8006-8027
|
|
30 Yang C,Sun W,Tomblin J S,et al.A semi-analytical method for determining the strain energy release rate of cracks in adhesively-bonded single-lap composite joints.Journal of Composite Materials,2007,41:1579-1602
|
|
31 Yang C,Chadegani A.Strain energy release rate determination of prescribed cracks in adhesively-bonded single-lap composite joints with thick bondlines.Composites:Part B,2008 39:863-873
|
|
32 Quaresimin M,Ricotta M.Stress intensity factors and strain energy release rates in single lap bonded joints in composite materials.Composites Science and Technology,2006,66:647-656
|
|
33 Shivakumar K N,Tan P W,Newman J C.A virtual crackclosure technique for calculating stress intensity factors for cracked three dimensional bodies.International Journal of Fracture,1988,36:R43-R50
|
|
34 Krueger R,Paris I L.Comparison of 2D finite element modeling assumptions with results from 3D analysis for composite skin-stiffener debonding.Composite Structures,2002,57(1-4):161-168
|
|
35 Krueger R,Minguet P J.Analysis of composite panelstiffener debonding using a shell/3D modeling technique.NASA CR-214299,2006
|
|
36 Xie D,Biggers S B.Strain energy release rate calculation for a moving delamination front of arbitrary shape based on the virtual crack closure technique.Part I:formulation and validation.Engineering Fracture Mechanics,2006,73:771-785
|
|
37 Ascione F,Mancusi G.Failure criteria for frp adhesive lap joints:a comparative analysis.Mechanics of Advanced Materials and Structures,2010,17(2):157-164
|
|
38 Datla N V,Papini M,Schroeder J A,et al.Modified DCB and CLS specimens for mixed-mode fatigue testing of adhesively bonded thin sheets.International Journal of Adhesion and Adhesives,2010,30(6):439-447
|
|
39 Alderliesten R C.Damage tolerance of bonded aircraft structures.International Journal of Fatigue,2009,31:1024-1030
|
|
40 Marannano G V,Mistretta L,Cirello A.Crack growth analysis at adhesive-adherent interface in bonded joints under mixed mode I/II.Engineering Fracture Mechanics,2008,75(18):51-72
|
|
41 Ishii K,Imanaka M,Nakayama H.Fatigue crack propagation behavior of adhesively-bonded CFRP/aluminum joints.Journal of Adhesion Science and Technology,2007,21(2):153-167
|
|
42 Hosseini-Toudeshky H.Thermal residual stresses effects on fatigue crack growth of repaired panels bounded with various composite materials.Composite Structures,2009,89:216-223
|
|
43 Hosseini-Toudeshky H,Saber M,Mohammadi B.Finite element crack propagation of adhesively bonded repaired panels in general mixed-mode conditions.Finite Elements in Analysis and Design,2009,45(2):94-103
|
|
44 Turon A,Camanho P P,Costa J.An interface damage model for the simulation of delamination under variablemode ratio in composite materials.NASA TM-213277,2004
|
|
45 Turon A,Camanho P P,Costa J.Accurate simulation of delamination growth under mixed-mode loading using cohesive elements:definition of interlaminar strengths and elastic stiffness.Composite Structures,2010,92:1857-1864
|
|
46 Camanho P P.Mixed-mode decohesion finite elements for the simulation of delamination in composite materials,NASA TM-211737,2002
|
|
47 Campilho R D S G,de Moura M F S F,Domingues J J M S.Modelling single and double-lap repairs on composite materials.Composites Science and Technology,2005,65:1948-1958
|
|
48 Campilho R D S G,de Moura1 M F S F.Tensile beha-viour of three-dimensional carbon-epoxy adhesively bonded single and double-strap repairs.International Journal of Adhesion and Adhesives,2009,29(6):678-686
|
|
49 de Moura M F S F,Campilho R D S G,Goncalves J P M.Pure mode II fracture characterization of composite bonded joints.International Journal of Solids and Structures,2009,46:1589-1595
|
|
50 Pinto A M G,Campilho R D S G,deMoura M F S F.Numerical evaluation of three-dimensional scarf repairs in carbon-epoxy structures.International Journal of Adhesion and Adhesives,2009,30(5):329-337
|
|
51 Campilho R D S G,de Moura M F S F.Buckling strength of adhesively-bonded single and double-strap repairs on carbon-epoxy structures.Composites Science and Technology,2010,70:371-379
|
|
52 Mohammed I,Liechti K M.Cohesive zone modeling of crack nucleation at bimaterial corners.Journal of the Mechanics and Physics of Solids,2000,48:735-764
|
|
53 Alfano G.On the influence of the shape of the interface law on the application of cohesive-zone models.Composites Science and Technology,2006,66:723-730
|
|
54 林国伟,陈普会.胶接修补复合材料层合板失效分析的PDA-CZM 方法.航空学报,2009,30(10):1877-1882
|
|
55 Banea M D,da Silva L F M.Mode I fracture toughness of adhesively bonded joints as a function of temperature:Experimental and numerical study.International Journal of Adhesion and Adhesives,2011,31(5):273-279
|
|
56 Banea M D,da Silva L F M.Adhesively bonded joints in composite materials:an overview.Journal of Materials Design and Applications,2009,223:1-18
|
|
57 Yamaguchi T,Okabe T,Yashiro S.Fatigue simulation for titanium/CFRP hybrid laminates using cohesive elements.Composites Science and Technology,2009,69:1968-1973
|
|
58 de Moura M F S F,Daniaud R,Magalhaes A G.Simulation of mechanical behaviour of composite bonded joints containing strip defects.International Journal of Adhesion and Adhesives,2006,26:464-473
|
|
59 Barbero E J,Sgambitterra G,Adumitroaie A.A discrete constitutive model for transverse and shear damage of symmetric laminates with arbitrary stacking sequence.Composite Structures,2011,93:1021-1030
|
|
60 Goncalves J P M,de Moura M F S F,de Castro P M S T.A three-dimensional finite element model for stress analysis of adhesive joints.International Journal of Adhesion and Adhesives,2002,22:357-365
|
|
61 Garcia J A,Chiminelli A.Characterization and material model definition of toughened adhesives for finite element analysis.International Journal of Adhesion and Adhesives,2011,31:182-192
|
|
62 Castagnetti D,Dragoni E.Failure analysis of complex bonded structures:Experimental tests and efficient finite element modelling by tied mesh method.International Journal of Adhesion and Adhesives,2011,31(5):338-346
|
|
63 Blackman B R K,Hadavinia H,Kinloch A J.The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints.International Journal of Fracture,2003,119:25-46
|
|
64 Karac A,Blackman B R K,Cooper V.Modelling the fracture behaviour of adhesively-bonded joints as a function of test rate.Engineering Fracture Mechanics,2011,78:973-989
|
|
65 Shenoy V,Ashcroft I A.Unified methodology for the pred-icttion of the fatigue behaviour of adhesively bonded joints.International Journal of Fatigue,2010,32(8):1278-1288
|
|
66 Kelly G.Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints.Composite Structures,2006,72:119-129
|
|
67 Krenk S,Jonsson J.Fatigue analysis and testing of adhesive joints.Engineering Fracture Mechanics,1996,53(6):859-872
|
|
68 Chadegani A,Batra R C.Analysis of adhesive bonded single-lap joint with an interfacial crack and a void.International Journal of Adhesion and Adhesives,2011,10:6-16
|
|
69 Cognard J Y.Numerical analysis of edge effects in adhesively-bonded assemblies application to the determination of the adhesive behaviour.Computers and Structures,2008,86:1704-1717
|
|
70 Weissberg V,Arcan M.Invariability of singular stress fields in adhesive bonded joints.International Journal of Fracture,1992,56:75-83
|
|
71 Chambolle A,Francfort G A.When and how do cracks propagate.Journal of the Mechanics and Physics of Solids,2009,57:1614-1622
|
|
72 McGeorge D.Inelastic fracture of adhesively bonded overlap joints.Engineering Fracture Mechanics,2010,77:1-21
|
|
73 Olia M,Rossetos J N.Analysis of adhesively bonded joints with gaps subjected to bending.International Journal of Solids and Structures,1996,33:2681-2693
|
DownLoad: