Citation: | QIN Zhaoye, CHU Fulei, YAN Shaoze. ADVANCES IN STUDY ON JOINT BEHAVIOR OF CLAMP BAND AND DYNAMICS OF SPACECRAFT-LAUNCH VEHICLE-CLAMP BAND COUPLING SYSTEM[J]. Advances in Mechanics, 2012, 42(4): 437-444. doi: 10.6052/1000-0992-11-035 |
1 袁家军. 卫星结构设计与分析. 北京: 中国宇航出版社, 2004.434-478
|
2 长征四号乙运载火箭用户手册. 中国运载火箭技术研究院,1999. 55-1-55-28
|
3 Marman clamp system design guidelines. Guideline No. GD-ED-2214. NASA Goddard Space Flight Centre, 2000.1-8
|
4 张延珍. 战术导弹连接刚度的研究. 强度与环境, 1992, 2:28-35
|
5 谭雪峰, 阎绍泽. 星箭包带式连接结构动力学研究进展. 导弹 与航天运载技术, 2010, 1: 1-6
|
6 Buffe J, Valli R. Shock analysis of the Ariane clampband release event on the Meteosat second generation satellite. In: Proceedings European Conference on Spacecraft Structures, 1998. 543-548
|
7 Takeuchi S, Onoda J. Estimation of separation shock of the Marman clamp system by using a simple band-mass model. Transactions of the Japan Society for Aeronauti- cal and Space Sciences, 2002, 45(147): 53-60
|
8 Chang K Y. V-band separation shock characteristics. NASA Jet Propulsion Laboratory, 2004, 10: 1-10
|
9 Iwasa T, Shi Q Z, Ando S, et al. Simplified SRS prediction method for pyroshock source of v-band clamp separation devices. In: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,2007. 1-12
|
10 韩晓健, 焦安超, 王睿. 包带低冲击装置冲击试验及数据分 析. 航天器环境工程, 2007, 24(5): 318-321
|
11 Lancho M, Larrauri I. CRSS: A separation system for launching very heavy payloads. Acta Astronautica, 2000,47: 153-162
|
12 Dowen D, Christiansen S. Development of a reusable, lowshock clamp band separation system for small spacecraft release applications. In: European Space Mechanisms & Tribology Symposium, 2001. 191-198
|
13 唐乾刚, 孙世贤. 包带式星箭紧锁预紧力分析. 国防科技大 学学报, 1996, 18(2): 20-25
|
14 Di Tolla R, Ernst M. Nonlinear finite element evaluation of marman clamp structural capability. In: AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1994, 1: 320-330
|
15 Jacob I R, Vinay K G, Nicholas E M. Techniques for finite element analysis of clamp band systems. In:50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2009. 1-9
|
16 Fritskey J. Clamping and coupling with V-band retainers. Machine Design, 2003, 75(8): 68-70, 72
|
17 Shoghi K, Rao H V, Barrans S M. Stress in a flat section band clamp. In: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2003, 217(7): 821-830
|
18 Shoghi K, Rao H V, Barrans S M. Stress in v-section band clamps. In: Proceedings of the Institution of Mechanical Engineers, Part C:Journal of Mechanical Engineering Sci- ence, 2004, 218(3): 251-262
|
19 Shoghi K, Barrans S, Ramasamy P. Axial load capacity of V-section band clamp joints. In: 8th International Conference on Turbochargers and Turbocharging, 2006. 273-285
|
20 秦朝烨, 阎绍泽, 褚福磊. 轴向拉力作用下包带锁紧装置连接 特性研究. 第八届全国动力学与控制学术会议. 哈尔滨, 2008
|
21 秦朝烨, 褚福磊, 阎绍泽. 包带式星箭连接结构轴向刚度研 究. 宇航学报, 2009, 30 (5): 2080-2085
|
22 Qin Z Y, Yan S Z, Chu F L. Dynamic analysis of clamp band joint system subjected to axial vibration. Journal of Sound and Vibration, 2010, 329: 4486-4500
|
23 白绍竣, 尉飞, 郑钢铁. 包带连接建模与非线性动力学特性 分析. 振动与冲击, 2010, 29(5): 6-10
|
24 孙海霞, 范瑞祥. 星箭包带锁紧装置分离过程动态包络的动 力学仿真. 导弹与航天运载技术, 2004(4): 15-18
|
25 Palmaer G D, Mitchell D H. Analysis and simulation of a high accuracy spacecraft separation system. Journal of Spacecraft and Rockets, 1966, 3(4): 458-463
|
26 李中郢, 崔乃刚. 载人飞船与运载火箭分离过程的仿真研究. 哈尔滨工业大学学报, 1999, 31(1): 119-122
|
27 Jeyakumar D, Rao B N. Dynamics of satellite separation system. Journal of Sound and Vibration, 2006(297): 444-455
|
28 谭雪峰, 阎绍泽. 星箭分离面径向冲击预示的简化圆环分析 方法. 机械工程学报, 2010, 46(16): 95-100
|
29 谭雪峰, 阎绍泽. 包带式星箭连接结构的动力学模拟及故障 分析. 清华大学学报(自然科学版), 2010, 50(8): 1205-1209
|
30 王毅, 朱礼文, 王明宇, 等. 大型运载火箭动力学关键技术及 其进展综述. 导弹与航天运载技术, 2000, 1: 29-37
|
31 潘忠文. 运载火箭动力学建模及振型斜率预示技术. 中国科 学E 辑: 技术科学, 2009, 39(3): 469-473
|
32 陈集丰, 王道锦, 杨云. 导弹、航天器结构分析与设计. 西安: 西北工业大学出版社, 1995. 166-196
|
33 Hurty W C. Dynamic analysis of structural systems using component modes. AIAA Journal, 1965, 3(4): 678-685
|
34 Craig Jr R R, Chang C J. Free-interface methods of substructure coupling for dynamic analysis. Journal of AIAA, 1976, 14(11): 1633-1635
|
35 Liew K M, Lee S E, Liu A Q. Mixed-interface substructures for dynamic analysis of flexible multibody systems. Engineering Structures, 1996: 18(7): 495-503
|
36 Lin C S, Cole T R. Dynamic model for Global Positioning System Block IIR space vehicle. Journal of Spacecraft and Rockets, 1997, 34(3): 334-359
|
37 侯悦民, 季林红, 金德闻. 结构局部刚度变化对小卫星动特 性的影响. 宇航学报, 2003, 24(6): 588-593
|
38 Alley V L, Leadbetter S A. Prediction and measurement of natural vibrations of multistage launch vehicles. AIAA Journal. 1963, 1(2): 374-379
|
39 李效韩, 杨炳渊. 结构振动分析中的连接子结构. 宇航学报,1987, 1: 7-15
|
40 楼梦麟. 连接子结构与子结构模态综合法. 振动工程学报,1995, 8(1): 52-56
|
41 杨炳渊. 连接子结构试验建模的发展与应用. 温度与环境,2000, 1: 51-59
|
42 邱吉宝, 王建民. 运载火箭模态试验仿真技术研究新进展. 宇航学报, 2007, 28(3): 515-521
|
43 郑晓亚, 张铎, 姜晋庆. 连接刚度对导弹固有特性的影响. 弹 箭与制导学报, 2005, 25(4): 667-669
|
44 南宫自军, 姜晋庆, 张铎. 固体火箭发动机连接结构接触应力 研究. 推进技术, 1997, 18(4): 54-57
|
45 南宫自军, 张铎. 运载火箭级间分离面接触分析. 西北工业大 学学报, 2000, 18(3): 466-468
|
46 周韶园. 考虑接触问题时某型导弹静、动特性分析: [硕士论 文]. 西安: 西北工业大学, 2002. 29-72
|
47 宋波涛. 飞行器结构考虑连接面刚度的固有特性计算研究: [硕士论文]. 西安: 西北工业大学, 2003. 30-96
|
48 胡爱虔, 张铎. 飞行器结构考虑连接面刚度的固有特性计算 研究. 弹箭与制导学报, 2005, 25(3): 298-301
|
49 王隆基. 套接结构的接触分析与试验研究: [硕士论文]. 西安: 西北工业大学, 2007. 5-32
|
50 郑晓亚, 张铎, 姜晋庆. 楔块连接的壳体力学特性分析. 机械 科学与技术, 2008, 27(12): 1665-1669
|
51 Qin Z Y, Yan S Z, Chu F L. Dynamic characteristics of launch vehicle and spacecraft connected by clamp band. Journal of Sound and Vibration, 2011, 330(10): 2161-2173
|
52 马兴瑞, 王本利, 苟兴宇. 航天器动力学—— 若干问题进展 及应用. 北京: 科学出版社, 2001. 1-29
|