固体氧化物燃料电池宏观力学效应研究进展

徐心海; 吴愉华; 严资林; 仲政

doi:10.6052/1000-0992-20-023

固体氧化物燃料电池宏观力学效应研究进展

doi: 10.6052/1000-0992-20-023

徐心海¹,
吴愉华¹,
严资林²,
仲政^2,*, ,

¹ 哈尔滨工业大学(深圳)机电工程与自动化学院, 广东深圳 518055
² 哈尔滨工业大学(深圳)理学院, 广东深圳 518055

基金项目:

科技部重点研发计划 (2018YFB1502602); 国家自然科学基金重点项目 (11932005); 深圳市自然科学基金项目 (JCYJ20200109113439837) 资助.

详细信息

作者简介:
*E-mail: zhongzheng@hit.edu.cn
仲政, 哈尔滨工业大学(深圳)教授, 博士生导师, 理学院院长. 国家杰出青年科学基金获得者, 入选新世纪百千万人才工程国家级人选、上海市优秀学科带头人计划、上海市领军人才计划、深圳市国家级领军人才, 获得首届全国高校青年教师奖、国务院政府特殊津贴、中国科协"全国优秀科技工作者"称号. 担任教育部力学专业教学指导委员会副主任委员、中国力学学会固体力学专业委员会副主任委员. 曾任中国力学学会常务理事、上海市力学学会理事长. 主要研究方向为多场耦合力学、复合材料力学与结构、材料疲劳与断裂. 近年来, 重点开展了固体氧化物燃料电池的多场耦合研究.

通讯作者:
仲政

中图分类号: TM911.4
计量
- 文章访问数: 2194
- HTML全文浏览量: 396
- PDF下载量: 343
- 被引次数: 0
出版历程
- 收稿日期: 2020-09-22
- 刊出日期: 2021-03-25

Progress in macro scale mechanical effects investigation of solid oxide fuel cells

XU Xinhai¹,
WU Yuhua¹,
YAN Zilin²,
ZHONG Zheng^{2,*
, ,}

¹ Department of Mechanical Engineering and Automation, Harbin Institute of Technology, Shenzhen 518055, Guangdong, China
² School of Science, Harbin Institute of Technology, Shenzhen 518055, Guangdong, China

More Information

Corresponding author: ZHONG Zheng

摘要

摘要: 固体氧化物燃料电池(SOFC)是一种清洁高效且具有广泛应用前景的绿色发电装置. SOFC采用了陶瓷材料电极和电解质并在高温下工作, 力学损伤是造成其性能和寿命衰减的主要因素之一. 由于实验测试的局限性, 基于宏观力学模型的数值模拟是优化SOFC电池和电堆结构、提高其性能和耐久性的重要手段. 本文综述并评价了SOFC宏观力学效应的研究进展, 介绍了SOFC在制造、正常运行和长期工作的不同阶段受到的残余应变、阳极氧化应变、化学膨胀、工作热应变以及蠕变等力学效应. 总结了各种力学效应以及目前关注较少的电化力耦合效应的理论和数值模拟研究现状, 最后展望了SOFC宏观力学性能研究的发展前景.
- 固体氧化物燃料电池 /
- 力学性能 /
- 数值模拟 /
- 耐久性 /
- 电化力耦合
Abstract: Solid oxide fuel cell (SOFC) is a clean and high-efficiency electric power generation device with promising application prospects. The SOFC uses the ceramic material as electrodes and electrolytes. Due to its high working temperature, mechanical failure is one of the most significant factors leading to the decrease of SOFC performance and lifetime. In-situ experimental measurements are quite limited in SOFCs. Therefore, a numerical simulation based on macro-scale mechanical models is generally employed for structure optimization of a single cell and stack. Progress in macro-scale mechanical effects of SOFCs is reviewed in this study. The principles and mathematical models of mechanical effects include residual strain, oxidation strain, chemical expansion, thermal ain, and creep strain in different SOFC manufacturing and operating stages are introduced. The latest development in the theoretical study and numerical simulation on different mechanical effects, as well as the electro-chemo-mechanical coupling effects, are summarized. In the last, the prospects of macro-scale mechanical effects investigation of SOFCs are discussed.
- solid oxide fuel cell /
- mechanical properties /
- numerical simulation /
- lifetime /
- electro-chemo-mechanical coupling

HTML全文

参考文献(83)

[1]	方秀荣. 2017. 固体氧化物燃料电池力学性能与长期性能研究. [博士论文]. 合肥: 中国科学技术大学 (Fang X R. 2017. Mechanical and long-term performance modeling of solid oxide fuel cell stacks. [PhD Thesis]. Hefei: University of Science and Technology of China).
[2]	梁灵江, 李凯, 颜冬, 等. 2015. 固体氧化物燃料电池力学性能和形变行为研究. 无机材料学报, 30:633-638 (Liang L J, Li K, Yan D, et al. 2015. Mechanical property and deformation behavior of SOFCs. Journal of Inorganic Materials, 30:633-638).
[3]	陆勇俊, 杨溢, 王峰会, 等. 2016. 连续梯度的功能层对燃料电池在初始还原过程中曲率及残余应力的影响. 物理学报, 65:348-355 (Lu Y J, Yang Y, Wang F H, et al. 2016. Effect of continuously graded functional layer on curvature and residual stress of solid oxide fuel cell in initial reduction process. Acta Physica Sinica, 65:348-355).
[4]	史翊翔, 蔡宁生, 王雨晴. 2019. 固体氧化物燃料电池能量转化与储存. 北京: 科学出版社 (Shi Y X, Cai N S, Wang Y Q. 2019. Solid Oxide Fuel Cell: Energy Conversion and Storage. Beijing: Science Press).
[5]	宋世栋, 韩敏芳, 孙再洪. 2014. 固体氧化物燃料电池平板式电池堆的研究进展. 科学通报, 59:1405-1416 (Song S D, Han M F, Sun Z H. 2014. The recent progress of planar solid oxide fuel cell stack. Chinese Science Bulletin, 59:1405-1416).
[6]	王绍荣, 肖钢, 叶晓峰. 2013. 固体氧化物燃料电池: 吃粗粮的大力士. 武汉: 武汉大学出版社 (Wang S R, Xiao G, Ye X F. 2013. Solid Oxide Fuel Cell: A Strong Man with Non-picky Stomach. Wuhan: Wuhan University Press).
[7]	韦文诚. 2014. 固体燃料电池技术. 上海: 上海交通大学出版社 (Wei W C. 2014. Technology of Solid Oxide Fuel Cells. Shanghai: Shanghai Jiaotong University Press).
[8]	谢佳苗, 王峰会. 2017. 基于热应力分析的固体氧化物燃料电池阳极功能层优化设计. 无机材料学报, 32:400-406 (Xie J M, Wang F H. 2017. Thermal stress analysis of solid oxide fuel cell with anode functional layer. Journal of Inorganic Materials, 32:400-406).
[9]	张玉财. 2016. 多轴应力状态下钎焊接头蠕变损伤与裂纹扩展研究. [博士论文]. 上海: 华东理工大学 (Zhang Y C. 2016. Creep damage and crack growth analysis of the brazed joint under multi-axial stress state. [PhD Thesis]. Shanghai: East China University of Science and Technology).
[10]	朱江. 2018. 固体氧化物燃料电池的性能退化模拟与抗积碳阳极设计. [博士论文]. 合肥: 中国科学技术大学 (Zhu J. 2018. Performance degradation modeling and non-coking anode design of solid oxide fuel cell. [PhD Thesis]. Hefei: University of Science and Technology of China).
[11]	Al-Masri A, Peksen M, Blum L, et al. 2014. A 3D CFD model for predicting the temperature distribution in a full scale APU SOFC short stack under transient operating conditions. Applied Energy, 135:539-547.
[12]	Al-Masri A, Peksen M, Khanafer K. 2019. 3D multiphysics modeling aided APU development for vehicle applications: A thermo-structural investigation. International Journal of Hydrogen Energy, 44:12094-12107.
[13]	Bao C, Wang Y, Feng D, et al. 2018. Macroscopic modeling of solid oxide fuel cell (SOFC) and model-based control of SOFC and gas turbine hybrid system. Progress in Energy and Combustion Science, 66:83-140.
[14]	Bishop S R. 2013. Chemical expansion of solid oxide fuel cell materials: A brief overview. Acta Mechanica Sinica, 29:312-317.
[15]	Bishop S R, Marrocchelli D, Chatzichristodoulou C, et al. 2014. Chemical expansion: Implications for electrochemical energy storage and conversion devices. Annual Review of Materials Research, 44:205-239.
[16]	Bove R, Ubertini S. 2008. Modeling Solid Oxide Fuel Cells: Methods, Procedures and Techniques. New York: Springer.
[17]	Brus G, Miyoshi K, Iwai H, et al. 2015. Change of an anode's microstructure morphology during the fuel starvation of an anode-supported solid oxide fuel cell. International Journal of Hydrogen Energy, 40:6927-6934.
[18]	Dubois A, Taghikhani K, Berger J, et al. 2019. Chemo-thermo-mechanical coupling in protonic ceramic fuel cells from fabrication to operation. Journal of the Electrochemical Society, 166:F1007-F1015.
[19]	Euser B, Berger J, Zhu H, et al. 2016a. Defect-transport-induced stress in mixed ionic-electronic conducting (MIEC) ceramic membranes. Journal of the Electrochemical Society, 163:F264-F271.
[20]	Euser B, Berger J, Zhu H, et al. 2016b. Chemically induced stress in tubular mixed ionic-electronic conducting (MIEC) ceramic membranes. Journal of the Electrochemical Society, 163:F1294-F1301.
[21]	Faes A, Hessler-Wyser A, Zryd A, et al. 2012. A review of RedOx cycling of solid oxide fuel cells anode. Membranes (Basel), 2:585-664.
[22]	Frandsen H L, Makowska M, Greco F, et al. 2016. Accelerated creep in solid oxide fuel cell anode supports during reduction. Journal of Power Sources, 323:78-89.
[23]	Fang X, Lin Z. 2018. Numerical study on the mechanical stress and mechanical failure of planar solid oxide fuel cell. Applied Energy, 229:63-68.
[24]	Jiang C, Gu Y, Guan W, et al. 2020a. Thermal stress analysis of solid oxide fuel cell with Z-type and serpentine-type channels considering pressure drop. Journal of the Electrochemical Society, 167:044517.
[25]	Jiang C, Gu Y, Guan W, et al. 2020b. 3D thermo-electro-chemo-mechanical coupled modeling of solid oxide fuel cell with double-sided cathodes. International Journal of Hydrogen Energy, 45:904-915.
[26]	Jiang W, Zhang Y, Luo Y, et al. 2013. Creep analysis of solid oxide fuel cell with bonded compliant seal design. Journal of Power Sources, 243:913-918.
[27]	Jiang W, Luo Y, Zhang W, et al. 2015. Effect of temperature fluctuation on creep and failure probability for planar solid oxide fuel cell. Journal of Fuel Cell Science Technology, 12:051004.
[28]	Jin X F, Xue X J. 2014. Modeling of chemical-mechanical couplings in anode-supported solid oxide fuel cells and reliability analysis. Rsc Advances, 4:15782-15796.
[29]	Joos J, Ender M, Rotscholl I, et al. 2014. Quantification of double-layer Ni/YSZ fuel cell anodes from focused ion beam tomography data. Journal of Power Sources, 246:819-830.
[30]	Kawada T, Horita T. 2016. High-Temperature Solid Oxide Fuel Cells for the 21st Century (Second Edition). Boston: Academic Press, 161-193.
[31]	Kong W, Zhang W, Zhang S, et al. 2016. Residual stress analysis of a micro-tubular solid oxide fuel cell. International Journal of Hydrogen Energy, 41:16173-16180.
[32]	Laurencin J, Delette G, Lefebvre-Joud F, et al. 2008. A numerical tool to estimate SOFC mechanical degradation: Case of the planar cell configuration. Journal of the European Ceramic Society, 28:1857-1869.
[33]	Laurencin J, Delette G, Morel B, et al. 2009. Solid Oxide Fuel Cells damage mechanisms due to Ni-YSZ re-oxidation: Case of the anode supported cell. Journal of Power Sources, 192:344-352.
[34]	Li Q, Li G, Cao G, et al. 2020. Effect of interface morphology on the residual stress distribution in solid oxide fuel cell. International Journal of Energy Research, 44:3497-3509.
[35]	Lim H T, Virkar A V. 2008. A study of solid oxide fuel cell stack failure by inducing abnormal behavior in a single cell test. Journal of Power Sources, 185:790-800.
[36]	Lin C K, Chen T T, Chyou Y P, et al. 2007. Thermal stress analysis of a planar SOFC stack. Journal of Power Sources, 164:238-251.
[37]	Lin C K, Lin K L, Yeh J H, et al. 2014. Creep rupture of the joint of a solid oxide fuel cell glass--ceramic sealant with metallic interconnect. Journal of Power Sources, 245:787-795.
[38]	Lin C K, Chen K Y, Wu S H, et al. 2019. Mechanical durability of solid oxide fuel cell glass-ceramic sealant/steel interconnect joint under thermo-mechanical cycling. Renewable Energy, 138:1205-1213.
[39]	Lou K, Wang F H, Lu Y J, et al. 2016. Effect of inhomogeneous re-oxidation on Ni-based SOFC oxidation resistance. International Journal of Modern Physics B, 30:1650200.
[40]	Mahato N, Banerjee A, Gupta A, et al. 2015. Progress in material selection for solid oxide fuel cell technology: A review. Progress in Materials Science, 72:141-337.
[41]	Malzbender J, Steinbrech R W. 2007. Advanced measurement techniques to characterize thermo-mechanical aspects of solid oxide fuel cells. Journal of Power Sources, 173:60-67.
[42]	Muramatsu M, Sato M, Terada K, et al. 2018. Shape deformation analysis of anode-supported solid oxide fuel cell by electro-chemo-mechanical simulation. Solid State Ionics, 319:194-202.
[43]	Nakajo A, Wuillemin Z, Van herle J, et al. 2009. Simulation of thermal stresses in anode-supported solid oxide fuel cell stacks. Part II: Loss of gas-tightness, electrical contact and thermal buckling. Journal of Power Sources, 193:216-226.
[44]	Nakajo A, Kuebler J, Faes A, et al. 2012. Compilation of mechanical properties for the structural analysis of solid oxide fuel cell stacks: Constitutive materials of anode-supported cells. Ceramics International, 38:3907-3927.
[45]	Nishida R T, Beale S B, Pharoah J G, et al. 2018. Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack. Journal of Power Sources, 373:203-210.
[46]	Peksen M. 2011. A coupled 3D thermofluid-thermomechanical analysis of a planar type production scale SOFC stack. International Journal of Hydrogen Energy, 36:11914-11928.
[47]	Peksen M. 2013. 3D thermomechanical behaviour of solid oxide fuel cells operating in different environments. International Journal of Hydrogen Energy, 38:13408-13418.
[48]	Peksen M, Al-Masri A, Blum L, et al. 2013. 3D transient thermomechanical behaviour of a full scale SOFC short stack. International Journal of Hydrogen Energy, 38:4099-4107.
[49]	Peksen M. 2014. 3D transient multiphysics modelling of a complete high temperature fuel cell system using coupled CFD and FEM. International Journal of Hydrogen Energy, 39:5137-5147.
[50]	Peksen M. 2015a. Numerical thermomechanical modelling of solid oxide fuel cells. Progress in Energy and Combustion Science, 48:1-20.
[51]	Peksen M. 2015b. 3D CFD/FEM analysis of thermomechanical long-term behaviour in SOFCs: Furnace operation with different fuel gases. International Journal of Hydrogen Energy, 40:12362-12369.
[52]	Peksen M. 2018. Safe heating-up of a full scale SOFC system using 3D multiphysics modelling optimisation. International Journal of Hydrogen Energy, 43:354-362.
[53]	Pianko-Oprych P, Zinko T, Jaworski Z. 2015a. Simulation of thermal stresses for new designs of microtubular solid oxide fuel cell stack. International Journal of Hydrogen Energy, 40:14584-14595.
[54]	Pianko-Oprych P, Zinko T, Jaworski Z. 2015b. Modeling of thermal stresses in a microtubular solid oxide fuel cell stack. Journal of Power Sources, 300:10-23.
[55]	Radovic M, Lara-Curzio E. 2004. Elastic properties of nickel-based anodes for solid oxide fuel cells as a function of the fraction of reduced NiO. Journal of the American Ceramic Society, 87:2242-2246.
[56]	Ramakrishnan N, Arunachalam V S. 1993. Effective elastic moduli of porous ceramic materials. Journal of the American Ceramic Society, 76:2745-2752.
[57]	Sarantaridis D, Atkinson A. 2007. Redox cycling of ni-based solid oxide fuel cell anodes: A review. Fuel Cells, 7:246-258.
[58]	Sarantaridis D, Chater R J, Atkinson A. 2008. Changes in physical and mechanical properties of SOFC Ni--YSZ composites caused by redox cycling. Journal of the Electrochemical Society, 155:B467.
[59]	Sato M, Muramatsu M, Terada K, et al. 2017. Analysis system of transient electrochemo-mechanical simulation of solid oxide fuel cell implemented in commercial FEM software//Trans of JSCES, 20170004.
[60]	Serincan M F, Pasaogullari U, Sammes N M. 2010. Thermal stresses in an operating micro-tubular solid oxide fuel cell. Journal of Power Sources, 195:4905-4914.
[61]	Shakrawar S, pharoah J G. 2010. A review of stress analysis issues for solid oxide fuel cells//Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, Canada. IMECE2010-40968.
[62]	Shang S, Lu Y. 2018. Modeling cooperative creep reoxidation effect on the mechanical stability of anode-supported solid oxide fuel cell. International Journal of Energy Research, 42:4909-4916.
[63]	Shang S, Lu Y, Cao X, et al. 2019. A model for oxidation-induced stress analysis of Ni-based anode-supported planar solid oxide fuel cell. International Journal of Hydrogen Energy, 44:16956-16964.
[64]	Shi Y, Bork A H, Schweiger S, et al. 2015. The effect of mechanical twisting on oxygen ionic transport in solid-state energy conversion membranes. Nature Materials, 14:721-727.
[65]	Singhal S C. 2014. Solid Oxide Fuel Cells, History. Encyclopedia of Applied Electrochemistry. New York: Springer, 2008-2018.
[66]	Terada K, Kawada T, Sato K, et al. 2011. Multiscale simulation of electro-chemo-mechanical coupling behavior of PEN structure under SOFC operation. Solid Oxide Fuel Cells 12 (Sofc Xii), 35:923-933.
[67]	Tuller H L, Bishop S R. 2011. Point defects in oxides: Tailoring materials through defect engineering. Annual Review of Materials Research, 41:369-398.
[68]	Waldbillig D, Wood A, Ivey D G. 2005. Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes. Solid State Ionics, 176:847-859.
[69]	Wang H L, Yu W S, Shen S P. 2019. Chemo-mechanical coupling effect in the high-temperature oxidation of metal materials: A review. Science China-Technological Sciences, 62:1246-1254.
[70]	Wang Y, Jiang W C, Luo Y, et al. 2017. Evolution of thermal stress and failure probability during reduction and re oxidation of solid oxide fuel cell. Journal of Power Sources, 371:65-76.
[71]	Wang Y, Jiang W, Song M, et al. 2019. Effect of frame material on the creep of solid oxide fuel cell. International Journal of Hydrogen Energy, 44:20323-20335.
[72]	Wang Y, Jiang W, Song M, et al. 2020. Effect of inhomogeneous oxidation on the mechanical degradation of anode supported solid oxide fuel cell. Journal of Power Sources, 450:227663.
[73]	Wincewicz K C, Cooper J S. 2005. Taxonomies of SOFC material and manufacturing alternatives. Journal of Power Sources, 140:280-296.
[74]	Wood T, Ivey D G. 2017. Chapter 4-The Impact of Redox Cycling on Solid Oxide Fuel Cell Lifetime, Solid Oxide Fuel Cell Lifetime and Reliability. Academic Press.
[75]	Wu Y, Shi Y, Cai N, et al. 2018. Thermal modeling and management of solid oxide fuel cells operating with internally reformed methane. Journal of thermal Science, 27:203-212.
[76]	Xu H, Chen B, Tan P, et al. 2019. Modeling of all-porous solid oxide fuel cells with a focus on the electrolyte porosity design. Applied Energy, 235:602-611.
[77]	Xu M, Li T S, Yang M, et al. 2016. Modeling of an anode supported solid oxide fuel cell focusing on thermal stresses. International Journal of Hydrogen Energy, 41:14927-14940.
[78]	Yakabe H, Baba Y, Sakurai T, et al. 2004a. Evaluation of the residual stress for anode-supported SOFCs. Journal of Power Sources, 135:9-16.
[79]	Yakabe H, Baba Y, Sakurai T, et al. 2004b. Evaluation of residual stresses in a SOFC stack. Journal of Power Sources, 131:278-284.
[80]	Zhang T, Zhu Q, Huang W L, et al. 2008. Stress field and failure probability analysis for the single cell of planar solid oxide fuel cells. Journal of Power Sources, 182:540-545.
[81]	Zhang Y C, Jiang W, Tu S T, et al. 2014. Simulation of creep and damage in the bonded compliant seal of planar solid oxide fuel cell. International Journal of Hydrogen Energy, 39:17941-17951.
[82]	Zhang Y C, Jiang W, Tu S T, et al. 2018. Effect of operating temperature on creep and damage in the bonded compliant seal of planar solid oxide fuel cell. International Journal of Hydrogen Energy, 43:4492-4504.
[83]	Zhang Y C, Lu M J, Jiang W, et al. 2019. Effect of the geometrical size on time dependent failure probability of the solid oxide fuel cell. International Journal of Hydrogen Energy, 44:11033-11046.