留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

工程科学前沿的拓荒者——郑哲敏

戴兰宏

戴兰宏. 工程科学前沿的拓荒者——郑哲敏[J]. 力学进展, 2013, 43(3): 265-294. doi: 10.6052/1000-0992-13-033
引用本文: 戴兰宏. 工程科学前沿的拓荒者——郑哲敏[J]. 力学进展, 2013, 43(3): 265-294. doi: 10.6052/1000-0992-13-033
DAI Lanhong. A pioneer in the frontier of engineering science——Zhe-Min Zheng[J]. Advances in Mechanics, 2013, 43(3): 265-294. doi: 10.6052/1000-0992-13-033
Citation: DAI Lanhong. A pioneer in the frontier of engineering science——Zhe-Min Zheng[J]. Advances in Mechanics, 2013, 43(3): 265-294. doi: 10.6052/1000-0992-13-033

工程科学前沿的拓荒者——郑哲敏

doi: 10.6052/1000-0992-13-033
详细信息
    作者简介:

    戴兰宏,男,1965年7月生,1996年获中国科学院力学研究所固体力学专业博士学位,1998年在北京大学力学系完成博士后研究工作,选聘进入中国科学院力学研究所非线性力学国家重点实验室工作. 曾在哈佛大学、香港科技大学访问工作,现任中国科学院力学研究所研究员、博士生导师、副所长;兼任中国力学学会爆炸力学专业委员会副主任委员、固体力学专业委员会委员、中国复合材料学会常务理事等. 主要从事冲击动力学、新型材料力学行为、细观复合材料力学研究,在非晶合金(金属玻璃) 剪切带等方面取得重要进展,2007年获国家杰出青年基金.

    通讯作者:

    戴兰宏,lhdai@lnm.imech.ac.cn

  • 中图分类号: O383, O389

A pioneer in the frontier of engineering science——Zhe-Min Zheng

More Information
    Corresponding author: DAI Lanhong
  • 摘要: 郑哲敏先生是著名力学家, 我国爆炸力学的奠基人和开拓者, 2012年度国家最高科学技术奖获得者. 本文回顾了郑哲敏先生在过去60多年中非常丰富的科研活动, 特别是他在爆炸加工、地下核爆、爆炸排淤、穿破甲、煤与瓦斯突出、水合物开采、水弹性动力学、材料力学行为等方面的杰出学术贡献. 这些工作闪耀着鲜明的工程科学特点, 即着眼国家重大需求, 从错综复杂的问题中概括提炼关键物理因素, 创新理论, 进而指导实践. 郑哲敏先生的科学贡献和学术思想, 对于力学学科发展, 有着重要的现实意义和参考价值.

     

  • [1] Abrahamson G R. 1961. Permanent periodic surface deformations due to atraveling jet. ASME J. Appl. Mech., 28: 519.
    [2] Aleseeveskii V P. 1966. Penetration of a rod into a target at high velocity.Combustion, Explosion, and Shock Waves, 2: 99-106.
    [3] Allen W A, Mapes J M, Wilson W G. 1954. An effect produced by oblique impactof a cylinder on a thin target. J. Appl. Phys., 25: 675-676.
    [4] Bahrani A S, Black T J, Crossland B. 1968. The mechanics of wave formationin explosive welding. Proc. Roy. Soc. London, A, 296: 123-136.
    [5] 白以龙. 1992. 冲击载荷下材料的损伤和破坏. 见: 冲击动力学进展, 王礼立等编, 合肥: 中国科技大学出版社, 34-57 (Bai YL. 1992. Damage and failure of materials under impact loading. in: Advances in Impact Dynamics, Wang L L et al ed.Hefei: China Sicence and Technology University Press, 34-57 (in Chinese))
    [6] Birkhoff G, MacDougall D P, Pugh E M, Taylor G. 1948. Explosives with linedcavities. J. Appl. Phys., 19: 563-582.
    [7] Bolshakov A, Pharr G M. 1998. Influence of pile-up on the measurement ofmechanical properties by load and depth sensing indentation techniques. J. Mater. Res.,13: 1049-1058.
    [8] Butkovich T R. 1965. Calculation of the shock wave from an undergroundnuclear explosion in granite. J. Geophys. Res., 70: 885-892.
    [9] Carl L R. 1944. Brass weld, made by detonation Impulse. Metal. Prog., 46: 102-103.
    [10] 陈力.1989.一维煤与瓦斯突出中破坏阵面恒稳推进的实验研究. [硕士论文]. 北京: 中国科学院力学研究所 (Chen L. 1989.Experimental research on steady advancing of failure front in one-dimensional coal and gas outburst. [Master Thesis].Beijing: Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [11] Cheng C M (郑哲敏). 1952. Analysis of pipe vibrations with internal fluid flow. A report submitted to theByron-Jackson Pump. Co. at Los Angeles, California,January.
    [12] Cheng C M. 1957. Problems in hydro-elasticity. in: Proceedings of 9th International Congress of AppliedMechanics, University of Bruxelles, AvenueFranklin Roosevelt, 7: 497-508.
    [13] Cheng C M. 1986a. Mechanics of explosive welding, in: Proceedings of the International Sympousium on IntenseLoadings and ItsEffects, Beijing, 848-853.
    [14] Cheng C M. 1986b. Several problems in hydro-elasto-plastic dynamics, in: Proceedings of the internationalSympousium on Intense Loadings and ItsEffects, Beijing, 1-12.
    [15] Cheng C M. 1991. On the study of explosion dynamics at the institute ofmechanics. Advances in Science of China, 1: 81-106.
    [16] Cheng C M, Li G H. 1986. Effects of strength and compressibility of materials on wave formation at interface inexplosive welding. in: Proceedings of the International Sympousium on Intense Loadings and Its Effects, Beijing, 524-529.
    [17] Cheng C M, Tan Q M. 1989. Mechanism of wave formation at theinterface in explosive welding. Acta Mech. Sinica, 5: 97-108.
    [18] Cheng C M, Cheng Y T. 1997. On the initial unloading slope in indentation of elasto-plastic solids by anindenter with an axisymmetricsmooth profile. Appl. Phys. Lett., 71: 2623-2625.
    [19] Cheng Y T, Cheng C M. 1998. Scaling approach to conical indentationin elastic-plastic solids with work hardening. J. Appl. Phys., 84: 1284-1291.
    [20] Cheng Y T, Cheng C M. 2004. Scaling, dimensional analysis, and indentation measurements. Mater. Sci. Eng.R, 44: 91-149.
    [21] Chou P C. 1977. The stability of shaped charge. J. Appl. Phys., 48: 4187-4195.
    [22] Cole P. 1960. 水下爆炸(中译本). 北京: 国防科学出版社 (Cole P. 1960. Underwater Explosion (Chinese version),Beijing: National Defense Press (in Chinese))
    [23] Cowan G R, Bergmann O R, Holtzman A H. 1871. Mechanism of bond zone waveformation in explosion clad metals. Metall. Trans., 2: 3145-3155.
    [24] Crossland B. 1982. Explosive Welding of Metals and Its Applications.Clarendon Press.
    [25] 丁晓良, 俞善炳, 丁雁生, 寇绍全, 谈庆明, 郑哲敏. 1989. 煤在瓦斯渗流作用下持续破坏的机制. 中国科学A, 6: 600-607(Ding Y L, Yu S B, Ding Y S, Kou S Q, Tan Q M, Zheng Z M. 1989. Continuous damage mechanism of coal under gas seepage.China Science A, 6: 600-607 (in Chinese))
    [26] Driscoll N W, Weissel J K, Goff J A. 2000. Potential for large-scalesubmarine slope failure and tsunami generation along the U. S. mid-Atlanticcoast. Geology, 28: 407-410.
    [27] DuPont E I. 1954. Blasters Handbook. Sesquicentennial Edition Revised,Wilmington: E.I DuPont de Nemours \& Compant (INC) Explosives Department,374-375.
    [28] Eggers J. 1997. Nonlinear dynamics and breakup of free-surface flows. Rev. Mod. Phys.,69: 865-927.
    [29] Eichelberger R J. 1956. Experimental test of the theory of penetration bymetallic Jets. J. Appl. Phys., 27: 63-68.
    [30] Eringen A C. 1977. Continuum Mechanics at the Atomic Scale. Crystal Lattice Defects, 7: 109-130.
    [31] Ezra A A. 1973. Principles and Practice of Explosive Metalworking.Industrial Newspaper Limited.
    [32] 范良藻, 孟珊. 1964. 爆炸成形的成形过程. [研究报告]. 北京: 中国科学院力学研究所 (Fan L Z, Meng S. 1964.Explosive forming process. [Research report]. Beijing: Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [33] Findik F. 2011. Recent developments in explosive welding, Mater. Design, 32: 1081-1093.
    [34] Fischer-Cripps A C. 2002. Naoindentation. Springer, New York.
    [35] Galileo Galilei. 1638. Dialogue Concerning Two New Sciences, Elsevier.
    [36] Moridis, G J, Collett T S, Boswell R, Kurihara M, Reagan M T, Koh C, Sloan E D. 2009. Towards production fromgas hydrates: Current status, assessment of resources, and simulation-based evaluation of technology and potential.SPE Reservoir Evaluation and Engineering, 10: 745-771.
    [37] Griffith A A. 1921. The phenomena of rupture and flow in solids. Phil. Trans. A, 221:163-198.
    [38] 洪友士. 2004. 郑哲敏先生主要经历与成就. 见: 应用力学进展, 北京: 科学出版社 (Hong Y S. 2004. The main experienceand achivements of Zhe-Min Zheng. in: Advances in Applied Mechanics, Beijing: Science Press (in Chinese))
    [39] Hunt J N. 1968. Wave formation in explosive welding. Phil. Mag., 17: 669-680.
    [40] Hutchinson J W. 1968. Singular behavior at the end of a tensile crack tip ina hardening material. J. Mech. Phys. Solids, 16: 13-31.
    [41] Irwin G R. 1951. Analysis of stresses and strain near the end of a cracktransversing a plate. ASME J. Appl. Mech., 24: 361-364.
    [42] Johnson G W. 1959. Some basic data on underground nuclear explosions,Lwarence Radiation Laboratory. UCRL-5675.
    [43] Kowalick J, Hay D R. 1871. A mechanism of explosive bonding. Metall. Trans., 2: 1955-1958.
    [44] 鲁晓兵, 张旭辉, 郑哲敏, 刘乐乐. 2011. 机械-热水合物开采方法. [研究报告]. 北京: 中国科学院力学研究所 (Lu X B,Zhang X H, Zheng Z M, Liu L L. 2011. Mechanical-thermal method of hydrate production. [Research report]. Beijing:Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [45] Meyers M A. 1994. Dynamic Behavior of Materials. John Willey \& Sons,INC,New York.
    [46] Munroe C E. 1888a. Modern explosives. Scribners, 5: 563-576.
    [47] Munroe C E. 1888b. Wave-like effects produced by detonation of guncotton.Amer. J. Science, 36: 48-50.
    [48] Nuckolls J H. 1959. A computer calculation of Rainier (The first 100milliseconds), Lwarence Radiation Laboratory, UCRL-5675.
    [49] Oliver W C, Pharr G M. 1992. An improved technique for determining hardness and elastic modulus using load anddisplacement sensing indentationexperiments, J. Mater. Res., 7: 1564-1583.
    [50] Oliver W C , Pharr G M. 2004, Measurement of hardness and elastic modulus by instrumented indentation: Advancesin understanding and refinements tomethodology, J. Mater. Res., 19: 3-20.
    [51] Orowan E. 1948. Fracture and strength of solids, Report of Progress in Physiscs, 12: 185-232.
    [52] Peng F J, Tan Q M, Cheng C M. 2000. Laboratory study on cracks in saturatedsands. Acta Mech. Sinica, 16: 48-54.
    [53] Philipchuk V. 1959. Explosive welding and forming open another door forindustry, Weld Engineering , 44: 6l-62.
    [54] 钱学森. 1957. 论技术科学. 科学通报, 4: 97-104 (Qiang X S. 1957. On technical science. Chinese ScienceBulletin, 4: 97-104 (in Chinese))
    [55] Rayleigh L. 1879. On the capillary phenomenon of jets. Proc. Roy. Soc. London, 29: 71-97.
    [56] Rice J R. 1968. A path independent integral and approximation analysis ofstrain concentration by notches and cracks, ASME J. Appl. Mech., 35: 379-386.
    [57] Rice J R, Rosengren G F. 1968. Plane strain deformation near a crack tip inpower law hardening material, J. Mech. Phys. Solids, 16, 1-12.
    [58] Robinson J L. 1975. Mechanics of wave formation in impact welding, Phil. Mag., 31:587-590.
    [59] Snay H G. 1956. Hydrodynamics of underwater explosions. in: Symposium on NavalHydrodynamics. (Sherman F S ed.), 325.
    [60] 谈庆明. 2005. 量纲分析. 合肥: 中国科技大学出版社 (Tan Q M. 2005. Dimensional Analysis. Hefei: China Science andTechnology University Press (in Chinese))
    [61] Tate A. 1967. A theory for the deceleration of long rods after impact. J. Mech. Phys. Solids,15: 387-399.
    [62] Taylor G I. 1943. A formulation of Mr. Tuck's conception of munroe jets. in:Scientific Papers of G.I. Taylor (1963), New York, 358-362.
    [63] Trehu A M, Bohrmann G, Rack F R, Torres M E, et al. 2003. Explanatorynotes. in: Proceedings of the Ocean Drilling Program, Initial Reports, V.204.
    [64] Tsien Hsue-Shen (钱学森). 1948. Engineering and engineering science. J. Chin. Inst. Eng., 6: 1-14.
    [65] von Foerster M. 1883. Experiments with Compressed Gun Cotton, Berlin,Germany: Mittler und Sohn.
    [66] von Karman T. 1911. Festigkeitsversuch unter allseitigem druck, Zeitshrift des Vereines DeutscherIngenieure, 55:1794-1757.
    [67] von Karman T, Duwez P. 1950. The propagation of plastic deformation insolids, J. Appl. Phys., 21: 987-994.
    [68] Wilkins M L. 1964. Calculation of Elastic-Plastic Flow, in Methods inComputational Physics (B. Alder, S. Fernbach and M. Rotenberg), AcademicPress, New York and London.
    [69] Wood W W. 1967. Experimental mechanics at velocity extremes---very highstrain rates, Experimental Mechanics, 7: 441-446.
    [70] Yang R, Zhang T H, Jiang P, Bai Y L. 2008. Experimental verification and theoretical analysis of therelationships between hardness,elastic modulus, and the work of indentation. Appl. Phys. Lett., 92: 231906.
    [71] 杨卫. 1995. 宏微观断裂力学. 北京: 国防工业出版社 (Yang W. 1995. Macroscopic and Microscopic Fracture Mechanics.Beijing: National Defense Industrial Press (in Chinese))
    [72] 伊万诺夫. 1988. 亚黏土爆破压实. 北京: 水利水电爆破咨询部 (Ivanov. 1988. Clayey Soil Compaction by Blasting.Beijing: Consulting Department of Water Resources and Hydropower Blasting (in Chinese))
    [73] 虞吉林, 郑哲敏. 1984. 一种非局部弹塑性连续体模型与裂纹尖端附近的应力分布.力学学报, 16: 485-494 (YU J L, Zheng Z M. 1984. A model of nonlocal elastic-plastic continuum applied to the stressdistribution near a crack tip. Acta Mechanica Sinica, 16: 485-494 (in Chinese))
    [74] Zhang X H, Lu X B, Li Q P. 2011. Formation of layered fracture and outburst during gas hydrate dissociation.J. Petro. Eng. Sci., 76: 212-216
    [75] 张登霞, 李国豪、周之洪, 邵丙璜. 1984. 材料强度在爆炸焊接界面波形成中的作用. 力学学报, 16: 73-80 (Zhang D X, Li GH, Zhou Z H, Shao P H. 1984. (Effect of material strength on forming process of explosive welding interface wave. Acta Mechanica Sinica, 16: 73-80 (inChinese))
    [76] 张建华, 张亮, 顾道良.1989. 爆炸排淤填石法实验研究. 第四届全国工程爆破会议报告 (Zhang J H, Zhang L, Gu D L.1989. Experimental study on toe-shooting method. in: the 4th National Engineering Blasting Conference (in Chinese))
    [77] 张旭辉. 2010.水合物沉积层因水合物热分解引起的软化和破坏研究. [博士论文], 北京:中国科学院力学研究所 (Zhang X H.2010. Research on the softening and damage of hydrate deposit due to the themal decompositon of hydrates. [PhD thesis].Beijing: Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [78] 郑哲敏. 1957. 关于工程地震的若干问题. 力学学报, 1: 337-349 (Zheng Z M. 1957. A review on engineeringseismology. Acta Mechanica Sinica,1: 337-349(in Chinese))
    [79] 郑哲敏. 1958a. 平板在流体作用下的振动. 力学学报, 2: 11-16 (Zheng Z M. 1958a. Vibration of panel in thepresence of a fluid. Acta MechanicaSinica, 2:11-16(in Chinese))
    [80] 郑哲敏. 1958b. 输水管的振动问题. 力学学报, 2: 100-111 (Zheng Z M. 1958b . Vibration of pipe line. ActaMechanica Sinica, 2: 100-111(inChinese))
    [81] 郑哲敏, 马宗魁. 1959. 悬臂梁在一侧受有液体作用时的自由振动. 力学学报, 3: 111-119 (Zheng Z M, Ma Z K. 1959.Vibration of cantilever beam placed against water with free surface.Acta Mechanica Sinica, 3: 111-119(in Chinese))
    [82] 郑哲敏, 孙同坤, 孙国芳. 1962. 球壳的变形计算和能量准则. [研究报告]. 北京: 中国科学院力学研究所 (Zheng Z M, Sun TK, Sun G F. 1962. Calculation and energy criterion of shell deformation. [Research report]. Beijing: Institute ofMechanics, Chinese Academy of Science (in Chinese))
    [83] 郑哲敏. 1962a. 爆炸成形模型律. [研究报告]. 北京: 中国科学院力学研究所 (Zheng Z M. 1962a. Scaling law ofexplosion forming. [Research report]. Beijing: Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [84] 郑哲敏. 1962b.水中击波入射平板时空化的形成及其作用. [研究报告]. 北京: 中国科学院力学研究所 (Zheng Z M. 1962b.Formation and effect of cavitation in shock wave intruding slab under water. [Research report]. Beijing: Institute ofMechanics, Chinese Academy of Science (in Chinese))
    [85] 郑哲敏, 解伯民. 1965. 关于地下爆炸计算模型的一个建议. [研究报告]. 北京: 中国科学院力学研究所 (Zheng Z M, Xie BM. 1965. A suggestion on the calculation model of underground explosion. [Research report]. Beijing: Institute ofMechanics, Chinese Academy of Science (in Chinese))
    [86] 郑哲敏, 解伯民, 刘育魁, 张德良. 1967a. 关于地下核爆炸理论计算的一个建议(第2稿). [研究报告]. 北京:中国科学院力学研究所 (Zheng Z M, Xie B M, Liu Y K, Zhang D L. 1967a. A suggestion on the theoretical analysis ofunderground nuclear explosion (the 2th version). [Research report]. Beijing: Institute of Mechanics, Chinese Academy ofScience (in Chinese))
    [87] 郑哲敏, 解伯民, 刘育魁, 张德良. 1967b. 地下核爆炸力学效应1967年计算小结. [研究报告]. 北京: 中国科学院力学研究所(Zheng Z M, Xie B M, Liu Y K, Zhang D L. 1967b. Brief summary of mechanical effect of underground nuclear explosion in1967. [Research report]. Beijing: Institute of Mechanics, Chinese Academy of Science (in Chinese))
    [88] 郑哲敏, 解伯民, 刘育魁, 张德良. 1969. 地下核爆炸的流体弹塑性计算方案和若干结果. [研究报告]. 北京:中国科学院力学研究所 (Zheng Z M, Xie B M, Liu Y K, Zhang D L. 1969. Hydro-elastoplasticity approach to analysingunderground nuclear explosion and several results. [Research report]. Beijing: Institute of Mechanics, Chinese Academyof Science (in Chinese))
    [89] 郑哲敏. 1973a. 破甲初步分析及一些基础知识. 力学情报, 24: 36-74 (Zheng Z M. 1973a. Preliminary analysis and somebasic theory on armor penetration. Mechanical Intelligence, 24: 36-74 (in Chinese))
    [90] 郑哲敏. 1973b. 破甲初步分析及一些基础知识(续). 力学情报, 4: 67-98 (Zheng Z M. 1973b. Preliminary analysis andsome basic theory on armor penetration (continued). Mechanical Intelligence, 4: 67-98 (in Chinese))
    [91] 郑哲敏, 高举贤, 谈庆明, 孙庚辰,乔敏,周一以. 1974. 聚能射流侵彻过程模型律. 力学, 1: 1-10 (Zheng Z M, Gao J XTang Q M, Sun G C,Qiao M, Zhou Y Y. 1974. Scaling law in the penetration process of shaped charge jet. Mechanics,1: 1-10 (in Chinese))
    [92] 郑哲敏, 谈庆明. 1977. 破甲机理的力学分析与简化模型(631破甲机理课题研究进展报告). 科技参考资料, 6: 108-164 (ZhengZ M, Tan Q M. 1977. Mechanical analysis and simplified model of armor penetration mechanism (631 Research progressreport of the armor penetration project). Science and Technology Reference Material, 6: 108-164 (in Chinese))
    [93] 郑哲敏. 1980. 关于射流侵彻的几个问题, 兵工学报, 1: 13-22 (Zheng Z M. 1980. Several problems on jetpenetration. Acta Armamentarii, 1: 13-22 (in Chinese))
    [94] 郑哲敏. 1981.聚能射流的稳定性问题. 爆炸与冲击, 1: 6-17 (Zheng Z M. 1981. Stability of jet produced by shapedcharge. Explosion and Shock Waves, 1: 6-17 (in Chinese))
    [95] 郑哲敏, 杨振声. 1981. 爆炸加工. 北京: 国防工业出版社 (Zheng Z M, Yang Z S. 1981. Explosion Processing. Beijing:National Defense Industry Press (in Chinese))
    [96] 郑哲敏. 1982a. 从数量级和量纲分析看煤与瓦斯突出的机理. 见: 力学与生产建设, 北京: 北京大学出版社, 128-137 (ZhengZ M. 1982a. The mechanisms of coal and gas outburst from the and dimensional analysis. in: Mechanics and ProductionConstruction. Beijing: Beijing University Press, 128-137 (in Chinese))
    [97] 郑哲敏. 1982b. 连续介质力学与断裂. 力学进展, 12: 133-140 (Zheng Z M. 1982b. Continuum mechanics and fracture.Advances in Mechanics, 12: 133-140 (in Chinese))
    [98] 郑哲敏, 杨振声, 金镠. 1989. 爆炸法处理水下海淤软基. 见: 郑哲敏文集. 北京: 科学出版社 (Zheng Z M, Yang Z S, JinL. 1989. Dispose soft sea ooze base by blasting. Collected Works of Zhe-Min Zheng. Beijing: Science Press (in Chinese))
    [99] 郑哲敏, 陈力, 丁雁生. 1993. 一维瓦斯突出破碎阵面的恒稳推进. 中国科学, 23: 377-384 (Zheng Z M, Chen L, Ding Y S.1993. Steady advancing of fracture front in one-dimensional gas outburst. Science China, 23: 377-384 (inChinese))
    [100] 郑哲敏, 谈庆明. 1996. 相似理论与模化. 见:《中国机械工程手册》第3篇. 北京: 机械工业出版社 (Zheng Z M, Tan Q M.1996. Similarity theory and model. in: Chinese Mechanical Engineering Handbook, Section 3. Beijing: China Machine Press(in Chinese))
    [101] 郑哲敏. 1995. 谈谈应用力学. 力学与实践, 17: 1-4.(Zheng Z M. 1995. A talk about applied mechanics,Mechanics and Aprctice, 17: 1-4 (in Chinese))
    [102] 郑哲敏, 周恒, 张涵信, 黄克智, 白以龙. 1995. 21世纪初的力学发展趋势. 力学进展, 25: 433-441 (Zheng Z M, Zhou H,Zhang H X, Huang K Z, Bai Y L. 1995. Trends of development in mechanics in the early 21st century.Advances in Mechanics, 25: 433-441 (in Chinese))
    [103] 郑哲敏. 2001. 学习钱学森先生技术科学思想的体会. 力学进展, 31: 484-488 (Zheng Z M. 2001. About the ideas of H STsien ontechnological sciences. Advances in Mechanics, 31: 484-488 (in Chinese)
    [104] 郑哲敏. 2004. 郑哲敏文集. 北京: 科学出版社 (Zheng Z M. 2004. Collected Works of Zhe-Min Zheng. Beijing: SciencePress (in Chinese))
  • 加载中
计量
  • 文章访问数:  1991
  • HTML全文浏览量:  32
  • PDF下载量:  5246
  • 被引次数: 0
出版历程
  • 收稿日期:  2013-05-20
  • 刊出日期:  2013-05-25

目录

    /

    返回文章
    返回